The Manufacture of Iron
F. Overman, 1851.
Covers ore roasting, charcoal and coke, blast furnaces, refining, puddling, forge hammers, rolling mills, shears, blowing machines
The PDF (48.8 MB), kept on this site. Source and credit: the scan on archive.org.
Notes
- Five period books against the first ten
- Ten period books against each other
- Overman, The Manufacture of Iron (1851)
- Percy, Metallurgy: Iron and Steel (1864)
- Source books for the processes the suite models
- Blake's stone breaker, patent and period texts
- Calcining kilns, the skip hoist and the bell top
- Proportioning and charging the furnace, the kiln and the cupola
- What a rolling stand is made of, part by part
- The anvils of the belly helve, the tilt hammer and the steam hammer
- The steel line 1850-1900: castings, rolled sections, plate, skelp and tube
- The founder's air furnace (Biringuccio, 1540) and the Stueckofen
- Overman, The Manufacture of Iron (1851): blast machines and hot blast
- The weight and size of a blast-furnace pig
- Percy, Nasmyth, Bauerman, Fairbairn and Swank on steam hammer uses - what a works forged under it that the belly helve could not, 1839-1892
- Truran, Overman, Percy, Fairbairn, Wilson, Courtney, Marks and Rose on wrought-iron stock sizes and weights, about 1840-1880
- Truran, Johnson, Overman and Kirk on blast, blowing engines, pigs and puddling
- Overman, Bauerman and Swank on the bloomery's make and fuel (1851-1892)
- Rankine, Wilson, Truran, Bauerman, Percy and Kirk on the draught of a chimney and the stack heights of the iron furnaces
- How a blast furnace's charge was counted and kept: Overman, Truran, Percy, Bauerman, Fairbairn (1851-1870)
Cited by
- Belly helve, iiex, pp. 336, 335
- Cold-blast furnace, iiex, pp. 151, 153, 152, 190, 158, 145, 189, 186, 157, 156, 149, 191, 193, 199, 200, 195, 165, 184, 187, 146, 160, 396, 401, 411, 155, 159
- Blowing machines, iiex, pp. 401, 411, 426, 395, 396, 397, 403, 402, 399, 412, 400, 413, 394, 398
- Calcining kiln and chutes, iiex, pp. 41, 42, 172, 40
- Cast anvil, iiex, pp. 336, 383, 365, 342
- Beehive coke oven, iiex, pp. 122, 130, 125, 126, 124
- Cupola furnace, iiex, pp. 163, 162
- Ore crusher, iiex, p. 40
- Sand pig bed, iiex, pp. 201, 205, 130, 240, 206
- Pipes and the steam main, iiex, p. 414
- Reverberatory furnace, iiex, pp. 263, 272, 270, 264, 372, 265, 262, 261, 371, 269
- Rolling mill, iiex, pp. 350, 347, 344, 348, 360, 367, 366, 378, 373, 346, 298, 349
- Steam hammer, iiex, p. 337
- Brass and zinc, iiex, pp. 35, 31, 36, 433
- Brick, lime and mortar, iiex, pp. 452, 453, 454, 455, 457, 156, 111, 458, 153
- Nails, rivets and bolts, iiex, pp. 391, 392
- Fuels, iiex, pp. 103, 99, 117, 151, 100, 106
- Ironstone and roasting, iiex, pp. 29, 39, 40, 42
- Pig iron, iiex, pp. 201, 206, 167
- Blast and furnace heat, iiex, pp. 401, 416, 411, 426, 442, 427, 165, 151
- Pig, bar and casting weights, iiex, pp. 268, 334
- Ore and fuel per ton, iiex, pp. 235, 151, 248
- Pipe bore and flow, iiex, pp. 414, 415, 413
- Stock and plate sizes, iiex, pp. 268, 366
- Making boiler plate, iiex, pp. 368, 369, 366
- Puddling, iiex, pp. 269, 268, 267, 270
- Rolling a bar, iiex, pp. 360, 344, 346, 347, 348, 354, 350, 358, 366, 349
- Running a blast furnace, iiex, pp. 157, 195, 194, 199, 200, 164, 187, 204, 203, 186, 201, 173
- Shingling and piling, iiex, pp. 268, 334
- How we scale from the sources, iiex, pp. 165, 401, 151, 117
- Vanilla against reality, iiex, pp. 383, 248, 117, 247, 116, 84, 87
- Pipes and the steam main, siex, p. 414
- Rolling mill, siex, pp. 350, 347, 344, 348, 360, 367, 366, 378, 373, 346, 298, 349
- Steam hammer, siex, p. 337
- Blast and furnace heat, siex, pp. 401, 416, 411, 426, 442, 427, 165, 151
- Hot blast, siex, pp. 416, 433, 442, 435, 430
- Running a blast furnace, siex, pp. 157, 195, 194, 199, 200, 164, 187, 204, 203, 186, 201, 173