Modern Machine-Shop Practice
J. Rose, 1901.
Covers lathe, planer, shaper, drilling and boring
The PDF (61.4 MB), kept on this site. Source and credit: the scan on archive.org.
Notes
- Five period books against the first ten
- Ten period books against each other
- Rose, Modern Machine-Shop Practice (1901)
- Source books for the processes the suite models
- Rose, Modern Machine-Shop Practice - sizes of the period's machine tools
- Truran, Overman, Percy, Fairbairn, Wilson, Courtney, Marks and Rose on wrought-iron stock sizes and weights, about 1840-1880
Cited by
- Bearings and grease, iiex, pp. 124, 125
- Drilling and boring machines, iiex, pp. 442, 278, 444, 219, 289, 218, 443, 431
- Engine lathe, iiex, pp. 119, 144, 219, 120, 146, 273, 294, 147, 145
- Shaping and planing machines, iiex, pp. 389, 397, 398, 399, 403, 34, 36, 415, 273, 400
- Vice bench and drawing table, iiex, pp. 377, 333, 382, 457, 383
- Brass and zinc, iiex, p. 246
- Nails, rivets and bolts, iiex, pp. 464, 467, 474, 465, 471, 466
- Machine-tool sizes, iiex, pp. 120, 133, 140, 143, 150, 397, 294, 273, 398, 278
- Hand work rates, iiex, pp. 457, 273, 278
- The machine shop, iiex, pp. 286, 420, 398, 405, 218, 289, 294, 119, 259, 295, 396, 397, 440, 219, 34, 36, 254, 273, 278