Calcining or burning flint in the period books
Books Metallurgy: Iron and Steel, A Treatise on the Metallurgy of Iron, Scientific Industries Explained, The Iron-Founder, An Autobiography, Coke, The Manufacture and Properties of Iron and Steel, Iron, its History, Properties and Processes of Manufacture
Sources: J. Percy, Metallurgy: Iron and Steel (London, 1864), pp. 238, 821, 833; H. Bauerman, A Treatise on the Metallurgy of Iron (title page 1870), pp. 81, 171, 356, 367-368; A. Watt, Scientific Industries Explained (1881), pp. 129, 147; S. Bolland, The Iron-Founder (1892), p. 238; H. Bessemer, An Autobiography (1905), p. 171; J. Fulton, Coke (1905), pp. 150, 155, 191-192; H. H. Campbell, The Manufacture and Properties of Iron and Steel (1907), p. 189; W. Fairbairn, Iron, its History, Properties and Processes of Manufacture (1865), p. 153. Pages are printed folios.
Purpose: whether a period book describes calcining or burning flint, and failing that the nearest analogue: quartz, ganister or silica for fire brick and furnace linings, and calcining in a kiln. Facts are the books'.
0. What was searched, and what the books do not give
- Searched: the OCR of the image-only books (Percy, Fairbairn Iron, Fairbairn Useful Information, Courtney, Rankine) for flint, ganister, Dinas, silica brick and calcin- beside quartz, sand or silica; the text layer of every other book in the books folder for flint, ganister, Dinas, silica brick, "calcin" beside quartz, sand, silica or flint, and burning of fire brick. Hits on place names (Flintshire, Flint & Pere Marquette), flint and steel, flint glass and the Kuhlmann "liquor of flints" were read and dropped.
- Percy's Refractory Materials is not held in the books folder, and Percy's Iron and Steel refers fire-brick making to his First Part (Fuel), which is not held either. Nothing here is from them.
- Harbison-Walker, A Study of the Open Hearth (1909) has no text layer and no OCR; it was not searched.
- No held book describes calcining or burning flint: no charge, fuel, kiln, duration or purpose. Section 1 holds the only places where flint is a material at all, and none of them is a burning.
- No held book describes how silica or ganister brick, or ganister itself, is burned or calcined; ganister is ground and rammed raw (section 2).
- No held book gives a time or temperature for calcining a siliceous stone.
1. About flint itself
None of these is a calcining of flint in a kiln.
- Bauerman p. 81, the fluxes for assaying iron ores: "Silica in the form of white glass-house sand or ground flints, which are practically free from iron". The purest silica is "obtained by crushing and grinding rock crystal, which has been previously shivered by quenching in water from a red heat, but this process is troublesome and unnecessary." Purpose: a flux in the assay crucible.
- Percy p. 238, the same assay: "White quartz, or rock crystal, plunged while red hot into water and afterwards pulverized, is preferred on account of its purity; but white sand, such as is used in glass-making, potter's ground flints, or pounded sandstone may be substituted." Used only when an ore lacks silica. Flint here is ground, not said to be heated.
- Watt p. 129, flint glass: "produced from the finest Lynn sand, calcined, sifted, and washed", with red lead or litharge, potash and nitre; "at least forty-eight hours' heating in the furnace". The calcined material is sand, not flint, and the 48 hours is the glass melt in its pot furnace. The same page calls silica "(sand or flint)".
- Watt p. 147, enamels: "Powdered flint" is an ingredient (brown enamel, flint 8 parts to red lead and manganese). No calcining stated.
- Bolland p. 238, moulding sand: silica "is simply 'flint-stone,' or 'quartz,' this substance being the most refractory of any of the rocks or earths". A statement of refractoriness, with no process.
2. Analogues: quartz, ganister and silica for linings
Labelled ANALOGUE: siliceous stone used raw, as a lining or brick, never described as calcined.
- ANALOGUE, Percy p. 821, the Bessemer converter: lined "with a thick coating of a mixture of fire-brick and ground 'ganister,' a variety of refractory sandstone from the lower coal-measures of the neighbourhood of Sheffield". It is "stamped in a moist state round a wooden core, which is afterwards removed; it is then slowly dried, and any cracks are made good". Then "a fire is made in the interior, and a gentle blast supplied, so as gradually to raise the temperature"; Bessemer "throws in a little salt, in order to render the lining more compact, by a glaze". Kind of firing: the lining is fired in place, not burned in a kiln first.
- ANALOGUE, Percy p. 833, crucible pots for casting steel: made of fire-clay, "or a siliceous stone occurring in the neighbourhood of Sheffield, or ground 'ganister'; millstone grit tempered with water is also used", rammed round a mould in the furnace.
- ANALOGUE, Bauerman pp. 367-368, converter lining: "in Sheffield, and in England generally, a nearly pure siliceous sandstone from below the coal measures, known as ganister, is found to be better adapted for this purpose than any other substance. It is prepared by grinding to a fine powder, and may be used alone or mixed with a certain proportion of powdered fire-brick; in either case a small quantity of water is used, sufficient to make the powder slightly coherent, which is then rammed hard". Preparation is grinding and wetting; no burning.
- ANALOGUE, Bauerman p. 356, the steel-melting house: the melting hole is "lined with refractory materials, such as fire-brick or the siliceous stone known as ganister"; p. 171, hot-blast ovens: "Fire-brick, ganister, or any similar refractory material".
- ANALOGUE, Fairbairn Iron p. 153, quoting Bessemer: the vessel is "lined with fire-brick, road-drift, or 'ganister,' which resists the heat better than any other material yet tried, and has also the advantage of cheapness".
- ANALOGUE, Bessemer p. 171: his early London trials used a clay or firebrick lining; his licensees' "silicious materials" such as "ganister or sand" lining stopped phosphorus being removed. What the lining was for, not how it was made.
- ANALOGUE, Fulton pp. 150, 155, 191-192, coke ovens: silica brick for the dome. "Silica brick, holding not over 2 per cent. of lime in combination" (p. 155); they "will wear three to four times as long as the fireclay brick" (p. 150, O. W. Kennedy's estimate); a silica crown life of "12 to 15 years" against 2 months to 3 or 4 years for clay crowns (p. 192). Fulton says nothing of how silica brick is made or burned.
- ANALOGUE, Campbell p. 189, open hearth: roof and walls of silica bricks, with a chromite joint between acid and basic work. Silica brick is named, not made.
3. Analogue: calcining in a kiln
- ANALOGUE, Campbell p. 189: for a basic hearth bottom, dolomite "is used in its natural state, but the better plan is to roast it in a cupola and then grind and mix with tar"; "well-burned dolomitic limestone answers well enough". This is a limestone, not a siliceous stone. No fuel, time or temperature given.
- Ore calcining kilns (what was charged, with what fuel, how long) are in the calcining kilns digest. They are iron ore, not silica, and are not repeated here.
- Watt p. 129 (section 1) is the only held text where a siliceous material (sand) is "calcined" before use; it gives no kiln, fuel or time for that step.
4. Summary
- FLINT: the books name ground flints as a silica flux and as an enamel ingredient (Bauerman p. 81, Percy p. 238, Watt p. 147). None calcines, burns or kilns flint.
- SILICA FOR LININGS: ganister and silica brick are the period's refractory silica (Percy p. 821, Bauerman p. 368, Fulton p. 155); ganister is ground and rammed raw, then dried and fired in place. How silica brick is burned is not in any held book.
- The only period "calcined" siliceous material is Lynn sand for flint glass (Watt p. 129), without process detail.
- Purpose of calcining flint for a fire-clay or brick body: the books say nothing.