Library
The period books the designs are checked against, and the notes on them.
Books
- Maxims and Instructions for the Boiler Room
- A Treatise on Steam Boilers
- The Boilermaker's Assistant
- Useful Information for Engineers
- The Manufacture of Iron
- The Iron Manufacture of Great Britain
- Iron, its History, Properties and Processes of Manufacture
- History of the Manufacture of Iron in All Ages
- Blast-Furnace Construction in America
- The Principles, Operation and Products of the Blast Furnace
- A Dictionary of Words and Phrases Used in Commerce
- Encyclopaedia of Chemistry (Lippincott)
- Scientific Industries Explained
- The Cupola Furnace
- The Iron-Founder
- Roll-Turning for Sections in Steel and Iron
- The Manufacture and Properties of Iron and Steel
- Coke
- Modern Machine-Shop Practice
- A Treatise on Machine Tools
- Machine Tools for Working Metal
- Catalogue
- Bolt, Nut and Rivet Forging
- Metallurgy: Iron and Steel
- An Autobiography
- A Study of the Open Hearth
- The Basic Open-Hearth Steel Process
- The Manufacture of Iron and Steel Tubes
- Treatise on Mills and Millwork, Part I
- Treatise on Mills and Millwork, Part II
- Treatise on Mills and Millwork
- A Treatise on the Steam Engine
- A Manual of the Steam Engine and Other Prime Movers
- Handbook of the Steam-Engine
- The Engineer, vol. 13
- Van Nostrand's Eclectic Engineering Magazine
- An Autobiography, ed. S. Smiles
- A Treatise on the Metallurgy of Iron
- British Mining
- Historical Statement of the Improvements made in the Duty performed by the Steam Engines in Cornwall
- Compound Corliss Engines
- The Corliss Engine, ed. C. D. Thurber
- Handbook of Corliss Steam Engines
- Water Consumption of an Unjacketed 1600 Horse Power Compound Harris-Corliss Engine (ASME)
- The Great Centennial Exhibition
- A Manual of the Steam-Engine, Part I
- A History of the Growth of the Steam-Engine
- Engine Book
- Practical Treatise on Limes, Hydraulic Cements, and Mortars (Van Nostrand)
Notes
- Bessemer, An Autobiography (1905)
- Bolland, The Iron-Founder (1892)
- Five period books against the first ten
- Ten period books against each other
- Campbell, The Manufacture and Properties of Iron and Steel (1907)
- Fairbairn, Treatise on Mills and Millwork, Part II (1863)
- Fulton, Coke (1905)
- Hamilton, Bolt, Nut and Rivet Forging (1914)
- Johnson, Blast-Furnace Construction in America (1917)
- Johnson, Principles, Operation and Products of the Blast Furnace (1918)
- Kirk, The Cupola Furnace (1899)
- Marks, The Manufacture of Iron and Steel Tubes (1903)
- Harbison-Walker, A Study of the Open Hearth (1909), and Dichmann, The Basic Open-Hearth Steel Process (1915)
- Overman, The Manufacture of Iron (1851)
- Percy, Metallurgy: Iron and Steel (1864)
- Rose, Modern Machine-Shop Practice (1901)
- Source books for the processes the suite models
- Spencer, Roll-Turning for Sections in Steel and Iron (1894)
- Blake's stone breaker, patent and period texts
- Calcining kilns, the skip hoist and the bell top
- Proportioning and charging the furnace, the kiln and the cupola
- Zinc and mercury retorts, direct-fusion brass
- Stopping, holding back and diverting molten iron in an open runner
- Fairbairn, Treatise on Mills and Millwork, Part I, water wheels (1864)
- What a rolling stand is made of, part by part
- The anvils of the belly helve, the tilt hammer and the steam hammer
- The steel line 1850-1900: castings, rolled sections, plate, skelp and tube
- Agricola, De re metallica (1556): copper smelting, roasting, cupellation, assay and liquation
- The founder's air furnace (Biringuccio, 1540) and the Stueckofen
- Farey, A Treatise on the Steam Engine (1827): engine ratings and blowing engines
- Sellers and Niles, machine-tool catalogues: sizes of lathes, cylinder borers, planers, shapers and drills, 1873-1895
- McNaught compounding of beam engines (Fairbairn, Bourne, Rankine, 1859-1870)
- Overman, The Manufacture of Iron (1851): blast machines and hot blast
- Percy, Metallurgy of Copper and Brass (1861) and of Lead (1870): cementation brass, cupellation, copper roasting and shaft furnaces
- The weight and size of a blast-furnace pig
- Rose, Modern Machine-Shop Practice - sizes of the period's machine tools
- Wilson, Treatise on Steam Boilers (1873), Fairbairn, Useful Information for Engineers (1860), Courtney, Boilermaker's Assistant (1880) and Hawkins, Maxims and Instructions for the Boiler Room (1897-1903): boilers, plate, safety valves, injectors and pipes
- Bourne, Handbook of the Steam-Engine (1865), Rankine, Manual of the Steam Engine (1859) and Farey (1827): steam tables, engine duty, pressures, ports and pipes
- Percy, Nasmyth, Bauerman, Fairbairn and Swank on steam hammer uses - what a works forged under it that the belly helve could not, 1839-1892
- Truran, Overman, Percy, Fairbairn, Wilson, Courtney, Marks and Rose on wrought-iron stock sizes and weights, about 1840-1880
- Truran, Johnson, Overman and Kirk on blast, blowing engines, pigs and puddling
- Overman, Bauerman and Swank on the bloomery's make and fuel (1851-1892)
- Rankine, Wilson, Truran, Bauerman, Percy and Kirk on the draught of a chimney and the stack heights of the iron furnaces
- Tribe, Henthorn, Shillitto, Denton, Sandhurst, Thurston and Allis on the compound Corliss mill engine (1876-1903)
- Lean, Hunt, Farey and Bourne on the Cornish pumping engine for mine drainage (1827-1884)
- Rankine, A Manual of Applied Mechanics (1876), the daily effect of a man
- Hunt, British Mining (1884), ore dressing: crushing, jigs, buddles, trunking, copper, lead and blende
- Fairbairn, Gillmore, Bolland, Kirk and Bauerman on grinding mills (millstones, edge runners, pan mills)
- Percy, Rankine, Fairbairn, Courtney and Wilson on wrought iron grades against shear steel
- Kirk on how a cupola's iron and fuel were measured into a charge (1899)
- How a blast furnace's charge was counted and kept: Overman, Truran, Percy, Bauerman, Fairbairn (1851-1870)
- Calcining or burning flint in the period books