Metallurgy: Iron and Steel
J. Percy, 1864.
Covers fuels, blast furnace, finery, puddling, cementation and crucible steel
The PDF (65.4 MB), kept on this site. Source and credit: the scan on archive.org.
Notes
- Five period books against the first ten
- Percy, Metallurgy: Iron and Steel (1864)
- Source books for the processes the suite models
- Calcining kilns, the skip hoist and the bell top
- What a rolling stand is made of, part by part
- The anvils of the belly helve, the tilt hammer and the steam hammer
- The founder's air furnace (Biringuccio, 1540) and the Stueckofen
- The weight and size of a blast-furnace pig
- Percy, Nasmyth, Bauerman, Fairbairn and Swank on steam hammer uses - what a works forged under it that the belly helve could not, 1839-1892
- Truran, Overman, Percy, Fairbairn, Wilson, Courtney, Marks and Rose on wrought-iron stock sizes and weights, about 1840-1880
- Rankine, Wilson, Truran, Bauerman, Percy and Kirk on the draught of a chimney and the stack heights of the iron furnaces
- Percy, Rankine, Fairbairn, Courtney and Wilson on wrought iron grades against shear steel
- Kirk on how a cupola's iron and fuel were measured into a charge (1899)
- How a blast furnace's charge was counted and kept: Overman, Truran, Percy, Bauerman, Fairbairn (1851-1870)
- Calcining or burning flint in the period books
Cited by
- Belly helve, iiex, pp. 695, 694, 693
- Calcining kiln and chutes, iiex, pp. 281, 374, 369, 371, 375
- Cast anvil, iiex, pp. 595, 594, 695, 694, 698, 696
- Sand pig bed, iiex, pp. 493, 494
- Reverberatory furnace, iiex, pp. 627, 643, 646, 641, 655, 658, 656, 657, 691, 647, 636, 629
- Rolling mill, iiex, p. 627
- Chimneys and draught, iiex, p. 692
- Steam hammer, iiex, pp. 697, 695, 698, 696
- Nails, rivets and bolts, iiex, p. 757
- Metal ladder, iiex, pp. 112, 192
- Pig iron, iiex, pp. 494, 493
- Pig, bar and casting weights, iiex, pp. 656, 657, 493
- Ore and fuel per ton, iiex, pp. 657, 655
- Stock and plate sizes, iiex, pp. 656, 754, 755, 709, 757, 760
- Cementation and crucible steel, iiex, pp. 768, 769, 772, 771, 859, 829, 830, 834, 835, 838, 836, 828, 831, 833
- Making boiler plate, iiex, pp. 734, 755, 759
- Puddling, iiex, pp. 643, 655, 658, 657, 656, 627, 670, 641, 646, 721
- Shingling and piling, iiex, pp. 693, 656, 694, 695
- Bessemer converter, siex, pp. 814, 823
- Cowper stove, siex, p. 428
- Open-hearth furnace, siex, pp. 823, 683
- Rolling mill, siex, p. 627
- Steam hammer, siex, pp. 697, 695, 698, 696
- Metal ladder, siex, pp. 112, 192
- Hot blast, siex, pp. 397, 394, 395, 399, 400, 401, 402, 428, 410, 419, 418, 398, 367
- Steel line, siex, p. 814