The weight and size of a blast-furnace pig

Books The Iron Manufacture of Great Britain, Blast-Furnace Construction in America, Metallurgy: Iron and Steel, The Manufacture of Iron, The Cupola Furnace, The Iron-Founder, History of the Manufacture of Iron in All Ages, A Dictionary of Words and Phrases Used in Commerce, Scientific Industries Explained, Encyclopaedia of Chemistry (Lippincott), A Treatise on the Metallurgy of Iron, Iron, its History, Properties and Processes of Manufacture

Sources

  • W. Truran, The Iron Manufacture of Great Britain (London, 1862), ironmanuf00trurrich, printed page = PDF page - 26. The plates are the text-less pages after PDF 279; Plate 36 is PDF 351 and Plate 43 is PDF 365. Pages 216, 217, 243, 247 and 248 named as leads are text (boiling and puddling), with no pig mould on them; the pig-mould figures are on the plates.
  • J. E. Johnson Jr., Blast-Furnace Construction in America (New York, 1917), blastfurnacecon00johngoog, read from archive.org's OCR text (the PDF has no text layer); printed pages from the running heads. American, a cross-check.
  • T. Turner, The Metallurgy of Iron (London, 1895), metallurgyirona00turngoog, archive.org OCR text; the page numbers were taken from the running heads and can be one page out.
  • J. Percy, Metallurgy: Iron and Steel (London, 1864), metallurgyartex02percgoog (no text layer; read from archive.org's OCR of the same scan), pp. 493-494.
  • F. Overman, The Manufacture of Iron (1851), manufactureofiro00overrich, PDF 153 and 212.
  • E. Kirk, The Cupola Furnace (1899), cupolafurnace01kirk; J. Bolland, The Iron Founder (ironfoundercompr00boll).
  • J. P. Lesley, Iron Manufacturer's Guide (1859), ironmanufacturer00lesl; Scrivenor, History of the Iron Trade (1854), acomprehensiveh01scrigoog; Osborn (1869), metallurgyirona00osbogoog; Bauerman (1868), treatiseonmetall00bauerich; Fairbairn, Iron (1861), ironitshistoryp01fairgoog; Swank, History of the Manufacture of Iron (1892), historyofmanufac00swanrich. All searched in archive.org OCR text for a pig's weight or size: none gives one, except Swank (below).
  • R. McElrath (ed.), A Dictionary of Words and Phrases Used in Commerce (New York, 1871), dictionaryofword00mcel, p. 389.
  • Scientific Industries Explained (London, 1881 by archive.org's metadata), ScientificIndustries, p. 94.
  • Encyclopaedia of Chemistry, Theoretical, Practical and Analytical (Philadelphia, Lippincott, 1877 by archive.org's metadata), b28127055_0002, article Iron, Blast Furnace, p. 257.

McElrath (PDF 395 = folio 389), Scientific Industries Explained (author Alexander Watt, 1881; PDF 88 = folio 94), the Encyclopaedia of Chemistry (PDF 289 = folio 257) and Swank (PDF 168 = folio 140) were checked in the PDF text layer. Turner, Scrivenor, Osborn, Bauerman, Fairbairn and Lesley were read as archive.org OCR text only. No page images were viewed except Truran's plates. Facts are the books'. INFERRED marks my own arithmetic. 1 lb = 0.4536 kg, 1 cwt = 112 lb = 50.8 kg, 1 ft = 0.3048 m, 1 in = 25.4 mm.

Table

FigureValueMetricPageQuote
Pig weight, American, 1871about 100 lb, varying by furnace45 kgMcElrath 389"Each pig weighs about 100 lbs., varying somewhat, however, at different furnaces."
Pig weight, British, 1877about 1 cwt or a little more51 kgEnc. Chem. 257"Each pig weighs about 1 cwt. or a little more."
Pig weight, British, 18812.5 cwt; 3 ft long, 4 in thick127 kg; 0.91 m x 100 mmSci. Ind. 94"The 'pigs' are about 3 feet long and 4 inches in thickness, weighing about 2 1/2 cwt. each."
Pig weight, American, Sterling works, undated visit60 to 100 lb, Townsend's large furnace; Swank's source is a Paris book of 1801 by the "Marquis de CreveCceur" (Crevecoeur), not Chastellux; the visit date is not given on the page27-45 kgSwank p. 140 (PDF 168, historyofmanufac00swanrich, PDF = folio + 28)"the ore was melted and converted into pigs of 60 to 100 pounds' weight"
Half-pig piece, British, 18954 1/2 cwt charge is "in half pigs, or about nine large pieces"; 504 lb / 9 = 56 lb a half pig, so a pig about 112 lb (INFERRED)25 kg a half; 51 kg a pig (INFERRED)Turner 290"the pig iron, which weighs about 4 1/2 cwts., and is in half pigs, or about nine large pieces in all, is lifted by hand"
Pig mould lengthabout 4 ft1.22 mEnc. Chem. 257"The moulds are about 4 feet long, and branch off from a general runner termed the 'sow.'"
Foundry scrap pig, a founder's own"good-sized pigs, say 6 or 8 inches square" (remelted scrap, not furnace pigs)150-200 mm squareBolland, PDF 132"run down into good-sized pigs, say 6 or 8 inches square"
Pig broken for the foundry or the cupolafour pieces to the hundredweight25-28 lb, 11-13 kg a piece (INFERRED, cwt of 100 or 112 lb)Kirk, PDF 267"estimating four pieces to the hundred weight"
Pig broken for the puddling furnace30-40 lb a piece13.6-18.1 kgTruran 208"30 to 40 lbs. is best, and the more uniform the better"
Styrian chill-cast plate pig5-6 ft x 12 in x 2-3 in, tapped "in quantities of 200 or 300 pounds"; plate mass at 7.2 g/cm3 is 170-306 kg (INFERRED)1.5-1.8 m x 305 mm x 51-76 mmOverman 147"The pigs are in the form of plates of from five to six feet in length, twelve inches wide, and from two to three inches thick."
Pigs per tonnot stated for blast furnaces; from the weights above, 1 ton at 100-112 lb is 20-22.4 pigs, at 2.5 cwt 8 (INFERRED)---
Sow (runner)"transverse feeding channels form the sows"; a main channel runs from the tap hole down one side, the rows of furrows fill from the farthest row to the nearest, a spade and sand shut each row off-Percy 493"The transverse feeding channels form the sows. The names of pig and sow are fancifully suggested by a sow feeding her litter."
Pig bed sizeCwm Celyn (Coalbrookdale): 6 rows of 28 furrows, so 168 pigs a cast (INFERRED); at 100 lb that is 7.5 tons (INFERRED), a size not stated in the book-Percy 493"there were 6 rows, and 28 furrows or moulds for the pigs in each"
Cast-iron pig mouldsused at Dowlais and Ebbw Vale in place of sand beds; Truran's Plate 36, figs. 216-217: six parallel closed grooves off one side channel, the section with half-round grooves; no scale is printed for these figures-Percy 494; Truran Pl. 36 (PDF 351)"sand-beds are not used, and the metal is run into pig-moulds of cast-iron"
Tapping intervalSouth Staffordshire every 12 h; Ebbw Vale every 4 h-Percy 494"tapping usually takes place at intervals of 12 hours"
Pig bed, American, 1917runner and beds in sand; a bed is a branch runner (sow) with its parallel pigs; chill beds over 4 ft wide, 18-20 ft long, 9-12 in thick, "many tons"1.2 m; 5.5-6.1 m; 230-300 mmJohnson 328, 330"The combination of the branch runner or sow and the pigs which go with it are known as a 'bed.'"
Breaking, sand bed, hotpig broken from sow with a crowbar under the junction while "still very little strength"; men wear wet wooden clogs-Johnson 331"breaking the pig from the sow by the use of a crowbar applied under the junction of the two"
Breaking, coldmen on the bed with sledges and crowbars break the iron from the sow and each pig in two (foundry iron)-Johnson 331"the men then go on the beds with heavy sledges and crowbars and break the iron from the sow and break the individual pigs in two"
Breaking, British practicered hot with a long bar as a lever between two pigs; cold, dropped across an A-shaped anvil or "an iron ball"-Enc. Chem. 257; Turner 105"The pigs are usually broken by manual labour, being allowed to fall from a height upon an iron ball"
Breaking, a pairin a chill bed one man pries up with two short crowbars while his partner strikes the pig/sow junction with "an extra heavy sledge"-Johnson 331"his partner strikes a hard blow at the junction of the pig and the sow with an extra heavy sledge"
CarryingStaffordshire c.1825: the engine man "also carried the pigs and weighed them", one man, with 35-40 tons a week a furnace; Dowlais Cardiff c.1893: groups of 30 pigs lifted by overhead crane-Turner 18-19; 104"the man who worked the blast engine also carried the pigs and weighed them"
Refinery plate carriedTruran Plate 43, figs. 249-251: the refined plate lifted by a two-wheeled cart with a long handle; weight not given-Truran Pl. 43 (PDF 365)list of plates: "Pig of refined metal on cart commonly used to remove it"
Cast count and weighta new furnace's cast about 5 tons by the fourth week; so 5 t at 100 lb is about 110 pigs (INFERRED)5.1 tTruran 41"to about 5 tons each cast in the fourth week"
Pig weight, charcoal against coke, British against Americanno source states a split; the two British figures (1 cwt, 2.5 cwt) are both coke-era, the American (100 lb, 60-100 lb) charcoal-era and later anthracite---

Gaps

  • No digested or searched book of 1841-1869 (Truran, Percy, Bauerman, Osborn, Scrivenor, Fairbairn, Overman, Lesley) states a blast-furnace pig's weight or section; the three figures found are from 1871, 1877 and 1881 encyclopaedic works, and the three disagree (100 lb, 1 cwt, 2.5 cwt).
  • No source gives the section of the pig mould (the half-round "D" cores are named only by Bauerman: "wooden cores of a D-shaped section", p. 9692 of the OCR, printed page not recorded), pigs per ton, or the bed's length and width. Truran's Plate 36 has no scale for figs. 216-217.
  • No period source says how many men carry a pig; only that one man carried them at a small 1825 furnace.
  • Web pages not period, read as search summaries only and not opened: a Colonial Williamsburg record of an Occoquan furnace pig (about 1755-85) at 30 1/2 x 5 x 5 in, a Pennsylvania marker for Eagle Furnace (sixty pigs of about 50 lb a cast of 1 1/2 tons), an Ohio marker (four feet long, four inches wide, six inches deep). They are leads for a second pass, not figures.
  • A pig of 25-27 kg from lead or silver "bullion" (Mining and Scientific Press, 1892, 75 lb) is not iron and is left out.
  • Per-district and period splits are not documented; Johnson 1917 gives no pig weight at all.

Period range: 60 lb to 2.5 cwt, 27-127 kg; most cited single figure: about 100 lb or 1 cwt, 45-51 kg.