exmods
For moddersCurrent modsPreviewLibrary
Books
  • Maxims and Instructions for the Boiler Room
  • A Treatise on Steam Boilers
  • The Boilermaker's Assistant
  • Useful Information for Engineers
  • The Manufacture of Iron
  • The Iron Manufacture of Great Britain
  • Iron, its History, Properties and Processes of Manufacture
  • History of the Manufacture of Iron in All Ages
  • Blast-Furnace Construction in America
  • The Principles, Operation and Products of the Blast Furnace
  • A Dictionary of Words and Phrases Used in Commerce
  • Encyclopaedia of Chemistry (Lippincott)
  • Scientific Industries Explained
  • The Cupola Furnace
  • The Iron-Founder
  • Roll-Turning for Sections in Steel and Iron
  • The Manufacture and Properties of Iron and Steel
  • Coke
  • Modern Machine-Shop Practice
  • A Treatise on Machine Tools
  • Machine Tools for Working Metal
  • Catalogue
  • Bolt, Nut and Rivet Forging
  • Metallurgy: Iron and Steel
  • An Autobiography
  • A Study of the Open Hearth
  • The Basic Open-Hearth Steel Process
  • The Manufacture of Iron and Steel Tubes
  • Treatise on Mills and Millwork, Part I
  • Treatise on Mills and Millwork, Part II
  • Treatise on Mills and Millwork
  • A Treatise on the Steam Engine
  • A Manual of the Steam Engine and Other Prime Movers
  • Handbook of the Steam-Engine
  • The Engineer, vol. 13
  • Van Nostrand's Eclectic Engineering Magazine
  • An Autobiography, ed. S. Smiles
  • A Treatise on the Metallurgy of Iron
  • British Mining
  • Historical Statement of the Improvements made in the Duty performed by the Steam Engines in Cornwall
  • Compound Corliss Engines
  • The Corliss Engine, ed. C. D. Thurber
  • Handbook of Corliss Steam Engines
  • Water Consumption of an Unjacketed 1600 Horse Power Compound Harris-Corliss Engine (ASME)
  • The Great Centennial Exhibition
  • A Manual of the Steam-Engine, Part I
  • A History of the Growth of the Steam-Engine
  • Engine Book
  • Practical Treatise on Limes, Hydraulic Cements, and Mortars (Van Nostrand)
Notes
  • Bessemer, An Autobiography (1905)
  • Bolland, The Iron-Founder (1892)
  • Five period books against the first ten
  • Ten period books against each other
  • Campbell, The Manufacture and Properties of Iron and Steel (1907)
  • Fairbairn, Treatise on Mills and Millwork, Part II (1863)
  • Fulton, Coke (1905)
  • Hamilton, Bolt, Nut and Rivet Forging (1914)
  • Johnson, Blast-Furnace Construction in America (1917)
  • Johnson, Principles, Operation and Products of the Blast Furnace (1918)
  • Kirk, The Cupola Furnace (1899)
  • Marks, The Manufacture of Iron and Steel Tubes (1903)
  • Harbison-Walker, A Study of the Open Hearth (1909), and Dichmann, The Basic Open-Hearth Steel Process (1915)
  • Overman, The Manufacture of Iron (1851)
  • Percy, Metallurgy: Iron and Steel (1864)
  • Rose, Modern Machine-Shop Practice (1901)
  • Source books for the processes the suite models
  • Spencer, Roll-Turning for Sections in Steel and Iron (1894)
  • Blake's stone breaker, patent and period texts
  • Calcining kilns, the skip hoist and the bell top
  • Proportioning and charging the furnace, the kiln and the cupola
  • Zinc and mercury retorts, direct-fusion brass
  • Stopping, holding back and diverting molten iron in an open runner
  • Fairbairn, Treatise on Mills and Millwork, Part I, water wheels (1864)
  • What a rolling stand is made of, part by part
  • The anvils of the belly helve, the tilt hammer and the steam hammer
  • The steel line 1850-1900: castings, rolled sections, plate, skelp and tube
  • Agricola, De re metallica (1556): copper smelting, roasting, cupellation, assay and liquation
  • The founder's air furnace (Biringuccio, 1540) and the Stueckofen
  • Farey, A Treatise on the Steam Engine (1827): engine ratings and blowing engines
  • Sellers and Niles, machine-tool catalogues: sizes of lathes, cylinder borers, planers, shapers and drills, 1873-1895
  • McNaught compounding of beam engines (Fairbairn, Bourne, Rankine, 1859-1870)
  • Overman, The Manufacture of Iron (1851): blast machines and hot blast
  • Percy, Metallurgy of Copper and Brass (1861) and of Lead (1870): cementation brass, cupellation, copper roasting and shaft furnaces
  • The weight and size of a blast-furnace pig
  • Rose, Modern Machine-Shop Practice - sizes of the period's machine tools
  • Wilson, Treatise on Steam Boilers (1873), Fairbairn, Useful Information for Engineers (1860), Courtney, Boilermaker's Assistant (1880) and Hawkins, Maxims and Instructions for the Boiler Room (1897-1903): boilers, plate, safety valves, injectors and pipes
  • Bourne, Handbook of the Steam-Engine (1865), Rankine, Manual of the Steam Engine (1859) and Farey (1827): steam tables, engine duty, pressures, ports and pipes
  • Percy, Nasmyth, Bauerman, Fairbairn and Swank on steam hammer uses - what a works forged under it that the belly helve could not, 1839-1892
  • Truran, Overman, Percy, Fairbairn, Wilson, Courtney, Marks and Rose on wrought-iron stock sizes and weights, about 1840-1880
  • Truran, Johnson, Overman and Kirk on blast, blowing engines, pigs and puddling
  • Overman, Bauerman and Swank on the bloomery's make and fuel (1851-1892)
  • Rankine, Wilson, Truran, Bauerman, Percy and Kirk on the draught of a chimney and the stack heights of the iron furnaces
  • Tribe, Henthorn, Shillitto, Denton, Sandhurst, Thurston and Allis on the compound Corliss mill engine (1876-1903)
  • Lean, Hunt, Farey and Bourne on the Cornish pumping engine for mine drainage (1827-1884)
  • Rankine, A Manual of Applied Mechanics (1876), the daily effect of a man
  • Hunt, British Mining (1884), ore dressing: crushing, jigs, buddles, trunking, copper, lead and blende
  • Fairbairn, Gillmore, Bolland, Kirk and Bauerman on grinding mills (millstones, edge runners, pan mills)
  • Percy, Rankine, Fairbairn, Courtney and Wilson on wrought iron grades against shear steel
  • Kirk on how a cupola's iron and fuel were measured into a charge (1899)
  • How a blast furnace's charge was counted and kept: Overman, Truran, Percy, Bauerman, Fairbairn (1851-1870)
  • Calcining or burning flint in the period books
Other sources
  • Other sources
  1. Library
  2. Book
  3. The Corliss Engine, ed. C. D. Thurber

The Corliss Engine, ed. C. D. Thurber

J. T. Henthorn, 1897.

Covers running mill Corliss engines, steam pipes, gears, foundations, proportions

The PDF (3.1 MB), kept on this site. Source and credit: the scan on archive.org.

Notes

  • Tribe, Henthorn, Shillitto, Denton, Sandhurst, Thurston and Allis on the compound Corliss mill engine (1876-1903)

Cited by

  • Compound Corliss engine, siex, pp. 19, 93
On this page
  • Notes
  • Cited by