Treatise on Mills and Millwork, Part II
W. Fairbairn, 1861.
Covers shafting, gearing, couplings, bearings, belts
The PDF (17.5 MB), kept on this site. Source and credit: the scan on archive.org.
Notes
- Five period books against the first ten
- Fairbairn, Treatise on Mills and Millwork, Part II (1863)
- Source books for the processes the suite models
- What a rolling stand is made of, part by part
- The steel line 1850-1900: castings, rolled sections, plate, skelp and tube
- Percy, Nasmyth, Bauerman, Fairbairn and Swank on steam hammer uses - what a works forged under it that the belly helve could not, 1839-1892
- Truran, Overman, Percy, Fairbairn, Wilson, Courtney, Marks and Rose on wrought-iron stock sizes and weights, about 1840-1880
- Fairbairn, Gillmore, Bolland, Kirk and Bauerman on grinding mills (millstones, edge runners, pan mills)
Cited by
- Bearings and grease, iiex, pp. 93, 73, 74, 75, 77, 78
- Simple horizontal engine, iiex, pp. 257, 258, 101
- Line shafting, iiex, pp. 50, 72, 51, 60, 79, 81, 82, 73, 74, 77, 78, 1, 123, 127, 259, 100, 101, 88, 93, 71, 102, 70, 43, 103, 94, 97, 98
- Rolling mill, iiex, p. 259
- Water wheels, iiex, pp. 50, 51
- Watt beam engine, iiex, p. 101
- Nails, rivets and bolts, iiex, p. 79
- Engine ratings, iiex, p. 101
- Stock and plate sizes, iiex, p. 257
- Rolling mill, siex, p. 259
- Engine ratings, siex, p. 101