Source books for the processes the suite models

Books The Manufacture of Iron, Blast-Furnace Construction in America, The Principles, Operation and Products of the Blast Furnace, The Cupola Furnace, The Iron-Founder, Roll-Turning for Sections in Steel and Iron, The Manufacture and Properties of Iron and Steel, Coke, Modern Machine-Shop Practice, Bolt, Nut and Rivet Forging, Metallurgy: Iron and Steel, An Autobiography, A Study of the Open Hearth, The Basic Open-Hearth Steel Process, The Manufacture of Iron and Steel Tubes, An Autobiography, ed. S. Smiles, Treatise on Mills and Millwork, Part II, A Treatise on the Steam Engine

Covers free full scans on archive.org of 1827-1920 practitioners' books on every process in the design pages (machines, processes), grouped as ironmaking, wrought iron and steel, foundry, rolling and forming, prime movers and transmission, machine shop and fasteners. Boilers are Hawkins; the Watt engine's proportions are Farey 1827 (treatiseonsteame01fareuoft). Purpose a reading list to ground shape and operation in source material the way Hawkins grounded the boilers. Nothing here is read in depth or digested.

Every identifier below was checked against https://archive.org/metadata/<id> on 2026-09-24: the title, the year, the page count (imagecount) and a PDF among the files, none access-restricted. The URL is https://archive.org/details/<id>; the OCR text is https://archive.org/download/<id>/<id>_djvu.txt. "Seen" means the chapter or page was read in the book's own contents list or text; "listed" means taken from a search listing or a summary only.

First shelf

Ten books that ground the most live machines, about 320 MB together.

#Bookidpp / MBGrounds
1Overman, The Manufacture of Iron (1851)manufactureofiro00overrich512 / 51the whole iron loop at iiex's period: charcoal and coke burning, ore roasting in kilns, mounds and heaps (pp. 39-47), charcoal, coke and anthracite blast furnaces, building and blowing in a stack, charges, tuyeres, scaffolds (pp. 144-214), refining, puddling and boiling furnaces (pp. 259-274), forge hammers, rolling mills, hand and force shears with eccentric and crank (p. 378), wooden cylinder bellows (p. 395). Seen
2Johnson, Blast-Furnace Construction in America (1917)blastfurnacecon00johngoog441 / 12hot-blast furnace plant: filling and top gear (ch. II p. 48, seen), blowing apparatus (ch. IV p. 119), hot-blast stoves, iron-pipe and firebrick (ch. V p. 190), stack, bosh, tuyeres, bustle pipe (ch. VI p. 233), sand pig beds and pig moulds (seen). Stove and stack pages listed
3Johnson, The Principles, Operation and Products of the Blast Furnace (1918)principlesoperat00john592 / 43burden and fuel ratio (chs. X-XI pp. 243-302), rate of driving (ch. XIII p. 302), handling the furnace (ch. XIV p. 314), pig grades. Listed; the OCR text returned an error on 2026-09-24
4Kirk, The Cupola Furnace (1899)cupolafurnace01kirk436 / 22the cupola alone, 23 chapters: lining, shell, sizes by diameter (chs. I-II), tuyeres and slag holes (III-IV), charging, melting zone, blast pressure (ch. V pp. 113-141). Chs. I-V seen
5Bolland, The Iron-Founder (1892)ironfoundercompr00boll406 / 23cores (Part II p. 121), elbows, bends and branch pipes in loam (p. 209), large pipe cast on end in loam (p. 227), green-sand pulleys and wheels (p. 284), patterns from models and templets (p. 339). Seen
6Spencer, Roll-Turning for Sections in Steel and Iron (1894)gri_33125008863850188 / 7the rolling mill's pass design: working drawings of grooved rolls for rails, girders, angles, tees, plus blooming and cogging for plates and billets. A plate book; which plate covers which section is not seen
7Campbell, The Manufacture and Properties of Iron and Steel (1907)manufactureprop00camprich682 / 58puddling, crucible steel, acid and basic Bessemer, acid and basic open hearth, with heat and slag tables. Listed
8Fulton, Coke (1905)coketreatiseonma00fultuoft600 / 34beehive ovens (326 mentions), retort and by-product ovens (244 and 287). Counted in the OCR text; chapters not seen
9Rose, Modern Machine-Shop Practice (1901; first ed. 1887)modernmachinesho01roseuoft694 / 64lathe (chs. VI-VIII pp. 129-221), lathe tools, drilling and boring in the lathe (X-XI pp. 254-295), shaping and planing (XVI-XVII pp. 389-426), drilling machines and drills (XVIII-XX pp. 428-462). Seen
10Hamilton, Bolt, Nut and Rivet Forging (1914)boltnutrivetforg00hamirich56 / 8bolt heading machines, successive steps in heading, header dies (single-blow rivet, double-deck three-blow), continuous-motion bolt and rivet headers with feed. Seen

Second shelf, by group

Ironmaking

  • Bell, Chemical Phenomena of Iron Smelting (1872), chemicalphenome00bellgoog, 479 pp, 17 MB: measured furnace gas and stock temperatures by a working ironmaster; a cross-check on Johnson's numbers. Listed.
  • Innes, Air Compressors and Blowing Engines (1906), aircompressorsa01innegoog, 317 pp, 11 MB: blowing engines. Contents not seen.
  • Wyer, A Treatise on Producer-Gas and Gas-Producers (1907), atreatiseonprod00wyergoog, 317 pp, 7 MB, and Latta, American Producer Gas Practice (1910), americanproducer00lattrich, 582 pp, 45 MB: the gas producer. Whether either treats the Siemens furnace producer rather than power gas is not seen.
  • Richards, Ore Dressing (1903), oredressing01richuoft, 690 pp, 57 MB: jaw crushers, stamps, the ore crusher. A school text. Listed.

Wrought iron and steel

  • Percy, Metallurgy: Iron and Steel (1864), metallurgyartex02percgoog, 995 pp, 69 MB: the only one with cementation (blister steel) as its own process (53 mentions), a long puddling section (606), Cowper stoves (3). Counted in the OCR text.
  • Bessemer, An Autobiography (1905), sirhenrybessemer00bessuoft, 508 pp, 40 MB: the converter, recarburising with spiegeleisen and ferromanganese, the ladle and ingot moulds, by the inventor. Listed.
  • A Study of the Open Hearth (Harbison-Walker, 1909), astudyopenheart00compgoog, 105 pp, 1 MB, and Dichmann, The Basic Open-Hearth Steel Process (1915), basicopenhearths00dichrich, 360 pp, 23 MB: the open hearth, the group's weakest-covered machine. Contents not seen.
  • Davis, The Iron Puddler (c. 1922), ironpuddlermylif00daviiala, 302 pp, 10 MB: a puddler's own account of working a heat; few numbers. Listed.

Foundry

  • Bolland, The Iron Founder Supplement (1893), theironfoundersu00boll, 424 pp, 20 MB: cupolas with erection table (p. 34), casting a hundred tons with ladle capacity table and runners (p. 67), pouring and feeding (p. 170). Seen.
  • West, American Foundry Practice (1882), americanfoundryp00west, 416 pp, 23 MB: making and venting beds (p. 81), heavy green-sand casting (p. 90), core ovens (pp. 125-132), ladles for heavy castings (p. 237). Seen.
  • Stimpson and Gray, Foundry Work (1920), foundrywork00stim, 234 pp, 14 MB: running a heat (pp. 112-116), ladles and pouring (pp. 118-119), common casting defects (p. 31). Seen.

Rolling and forming

  • Marks, The Manufacture of Iron and Steel Tubes (1903), manufactureofiro00markrich, 180 pp, 19 MB: butt-welded tube (ch. I), lap-welded tube with grooved rolls and mandrel (ch. II). Seen. Grounds the rolled pipe.
  • Nasmyth, An Autobiography (1883), jamesnasmythengi00nasmiala, 514 pp, 32 MB: the steam hammer by its inventor; a memoir, no tables. Hammer pages not seen.
  • Jernberg, Forging (1919), forgingmanualpr00jerngoog, 157 pp, 6 MB: hand forging behind drop stamping and bending. Listed.

Prime movers and transmission

  • Fairbairn, Treatise on Mills and Millwork, Part II (1861), treatiseonmillsm02fair, 336 pp, 18 MB: flywheels, shafting, gearing, plummer blocks, belts. Listed.
  • Box, A Practical Treatise on Mill-Gearing (1877), apracticaltreat00boxgoog, 179 pp, 4 MB: gear, shaft and pulley proportion tables. Listed.
  • Rankine, A Manual of the Steam Engine (1859), amanualsteameng03rankgoog, 615 pp, 22 MB: the horizontal engine, governors, condenser and air pump; applied mechanics more than practice. Listed.
  • Greene, Pumping Machinery (1911), pumpingmachinery00greerich, 748 pp, 53 MB: feed pumps, the injector (29 mentions), lift and force pumps. Cornish 24 mentions, cataract none.

Machine shop and fasteners

  • Rose, The Complete Practical Machinist (1895), completepractica00roseuoft, 544 pp, 31 MB: cutting speed and feed (ch. II p. 64), boring bars (ch. IX p. 178), tool grinding (ch. XVII p. 347), marking out (ch. XVIII p. 360). Seen.
  • Colvin and Stanley, American Machinists' Handbook (1914 printing), americanmachinis00colv, 716 pp, 37 MB: speed, feed and size tables. Listed.
  • Knight's American Mechanical Dictionary, vol. II (1882), knightsamericanm02knig, 1004 pp, 87 MB: entries Nail-machine and Nail-making machine (the cut-nail machine), Rivet-machine, Bolt-heading machine. Entries seen, not read.
  • Wilbur, History of the Bolt and Nut Industry of America (1905), HistoryOfTheBoltAndNutIndustry, 13.5 MB: heading machines from hand to power, by maker. An industry history. Listed.

Gaps

  • Cornish engine: Pole, A Treatise on the Cornish Pumping Engine (1844) is not on archive.org; a Google Books record QLZMAAAAYAAJ exists and its full view is not confirmed. Farey 1827, already in use, covers the Watt single-acting pumping engine the Cornish grew from: cataract 35 mentions, equilibrium valve 19.
  • Drawing office: no period book on drafting-room practice found.
  • No free copy: Aston and Story, Wrought Iron (1939, lending only); Harbord and Hall, The Metallurgy of Steel (not on archive.org); Taylor, On the Art of Cutting Metals (1907, not found); Tafel, Rolling Mill Practice (not found).