A Treatise on the Metallurgy of Iron
H. Bauerman, 1870 printing.
Covers hammers, helves, steam hammers, forge and mill machinery, steel
The PDF (42.1 MB), kept on this site. Source and credit: the scan on archive.org.
Notes
- Calcining kilns, the skip hoist and the bell top
- Proportioning and charging the furnace, the kiln and the cupola
- The weight and size of a blast-furnace pig
- Percy, Nasmyth, Bauerman, Fairbairn and Swank on steam hammer uses - what a works forged under it that the belly helve could not, 1839-1892
- Overman, Bauerman and Swank on the bloomery's make and fuel (1851-1892)
- Rankine, Wilson, Truran, Bauerman, Percy and Kirk on the draught of a chimney and the stack heights of the iron furnaces
- Fairbairn, Gillmore, Bolland, Kirk and Bauerman on grinding mills (millstones, edge runners, pan mills)
- How a blast furnace's charge was counted and kept: Overman, Truran, Percy, Bauerman, Fairbairn (1851-1870)
- Calcining or burning flint in the period books
Cited by
- Belly helve, iiex, pp. 288, 289, 290
- Calcining kiln and chutes, iiex, pp. 110, 112, 111, 113, 212
- Ore crusher, iiex, pp. 103, 104, 105, 207, 106
- Sand pig bed, iiex, p. 193
- Rolling mill, iiex, pp. 299, 301, 304, 309, 300
- Chimneys and draught, iiex, pp. 267, 356
- Steam hammer, iiex, pp. 291, 292, 294, 295, 378, 296, 293
- Cast and wrought iron, iiex, pp. 3, 4
- Ironstone and roasting, iiex, pp. 52, 62, 78, 212, 106, 107, 108, 112, 113
- Metal ladder, iiex, pp. 3, 4, 5, 6, 7, 9, 10, 11
- Ore and fuel per ton, iiex, p. 241
- Stock and plate sizes, iiex, pp. 315, 314
- Cementation and crucible steel, iiex, p. 356
- Rolling a bar, iiex, pp. 299, 301, 302, 300
- Shingling and piling, iiex, pp. 287, 297, 289, 288, 292, 291, 314, 315, 316, 290
- Vanilla against reality, iiex, pp. 241, 238
- Cowper stove, siex, pp. 169, 167, 168
- Rolling mill, siex, pp. 299, 301, 304, 309, 300
- Steam hammer, siex, pp. 291, 292, 294, 295, 378, 296, 293
- Metal ladder, siex, pp. 3, 4, 5, 6, 7, 9, 10, 11