The Iron-Founder
S. Bolland, 1892.
Covers moulding, cores, loam pipe cast on end, patterns
The PDF (22.3 MB), kept on this site. Source and credit: the scan on archive.org.
Notes
- Bolland, The Iron-Founder (1892)
- Five period books against the first ten
- Ten period books against each other
- Source books for the processes the suite models
- Stopping, holding back and diverting molten iron in an open runner
- The anvils of the belly helve, the tilt hammer and the steam hammer
- The steel line 1850-1900: castings, rolled sections, plate, skelp and tube
- The weight and size of a blast-furnace pig
- Fairbairn, Gillmore, Bolland, Kirk and Bauerman on grinding mills (millstones, edge runners, pan mills)
- Calcining or burning flint in the period books
Cited by
- Ladles, iiex, p. 232
- Molten canals, iiex, pp. 79, 235
- Pipes and the steam main, iiex, pp. 209, 142, 324, 227, 335, 336, 125, 228
- Cast and wrought iron, iiex, pp. 76, 83, 85, 84
- Pig iron, iiex, pp. 69, 68
- Moulding in sand, iiex, pp. 314, 315, 326, 344, 37, 42, 38, 310, 133, 302, 29, 27, 26, 181, 46, 124, 52, 262, 79, 69, 75, 243, 264, 303, 147, 233, 97, 148, 99, 98, 263
- Ladles, siex, p. 232
- Pipes and the steam main, siex, pp. 209, 142, 324, 227, 335, 336, 125, 228