Molten Canal (Tap)

Pours metal out of the far end of a canal.

The tap drains a run out at its far end and pours down into whatever is parked beneath it: a plain right-click with a dried Shank Ladle or a large tool mold in hand parks it, sneak plus right-click with an empty hand retrieves what is parked along with its contents, and ctrl plus right-click toggles whether it is pouring at all. Parking needs solid ground directly underneath; nothing floats a ladle or a mold in the air. The ladle takes the tap's cell for its bowl and the neighbouring cell on the parking player's side for its shank, and is refused where that cell is not clear.

See Molten metal and casting.

Interaction

  • Right-click to break the clay plug out
  • Right-click to blow the furnace in
  • Right-click to stop the tap with a clay plug
Molten Canal (Tap), isometric
Molten Canal (Tap), the front (south)frontMolten Canal (Tap), the right (east)rightMolten Canal (Tap), the back (north)backMolten Canal (Tap), the left (west)leftMolten Canal (Tap), the top (up)top
Molten Canal (Tap), drawn from the front, which faces south.

Made by

Fire clay x 4
Fire clay x 4
Molten Canal (Tap)

Needs: 8 Fire clay; makes 1 Molten Canal (Tap)

Amounts are the mod's defaults; the recipe-cost level changes them (see recipe cost levels).

Crafting chain

  1. Fire clay is dug.
  2. A Molten Canal Diagram is drafted at the Drawing Table. At the Vice Bench it goes in the bench's diagram slot, with 4 fire clay in the centre cell of the crafting grid and 4 more in the cell below it, which gives the Molten Canal (Tap); it takes no masonry.
  3. The tap is laid at the far end of a run, with a Shank Ladle or a large tool mold parked under it.