Molten Canal (Straight)
Straight molten canal segment.
This shape, like the bend, tee and cross, takes a Canal Plate: drive one into a joint with a hammer in the off hand and it cuts the run there, metal or no metal in the cell, and tongs draw it out again. A plate is refused in a cell that has frozen solid.
Which rock or brick a run is cut from changes nothing about how it carries metal; that choice is cosmetic. See Molten metal and casting.

front
right
back
left
topMade by
| Mortar | ||||
| Fire clay x 4 | any Brick x 2 | any Brick x 2 | any Brick x 2 | Fire clay x 4 |
| Molten Canal (Straight) x 2 | ||||
Needs: 6 any Brick, 1 Mortar, 8 Fire clay; makes 2 Molten Canal (Straight)
| Mortar | ||||
| Fire clay x 4 | Fireclay brick x 2 | Fireclay brick x 2 | Fireclay brick x 2 | Fire clay x 4 |
| Molten Canal (Straight) x 2 | ||||
Needs: 6 Fireclay brick, 1 Mortar, 8 Fire clay; makes 2 Molten Canal (Straight)
Amounts are the mod's defaults; the recipe-cost level changes them (see recipe cost levels).
Crafting chain
- Fire clay is dug, and six bricks and a mortar, of one colour or all fire brick, supply the masonry.
- A Molten Canal Diagram is drafted at the Drawing Table. At the Vice Bench it goes in the bench's diagram slot, with the masonry and fire clay laid in the crafting grid in the pattern of the Molten Canal (Straight). Holding right-click on the bench top with a hammer works the piece; the Craft button refuses it.
- The pieces are laid end to end from the start; a straight sealed with fire clay cuts the run.