Molten Canal (Slope Drop)

The tenth piece of a slope runner; its lip pours into the canal start below.

The last piece of a slope runner, with a lip that pours the metal into the Molten Canal (Start) one block below it. There is no item for it: the tenth Molten Canal (Slope) placed in a run becomes this piece, and that is why it is not in the handbook or the creative inventory.

It pours into the start at 20 units a second by default, and the stream can be seen falling from the lip. The level canal then carries on from that start.

Break it and it gives back a Molten Canal (Slope).

Molten Canal (Slope Drop), isometric
Molten Canal (Slope Drop), the front (south)frontMolten Canal (Slope Drop), the right (east)rightMolten Canal (Slope Drop), the back (north)backMolten Canal (Slope Drop), the left (west)leftMolten Canal (Slope Drop), the top (up)top
Molten Canal (Slope Drop), drawn from the front, which faces south.

What goes wrong

"The tenth piece of a slope runner needs a canal start one block down." There is no start directly under the cell. Place a Molten Canal (Start) there and set the slope again.

A wrench does nothing. The drop keeps the direction it was placed with. To change it, break the piece and place a slope again.

See Molten metal and casting.