Molten Canal (Bend)
A 90° bend in a molten canal run.
A 90-degree turn in a canal run, with no valve function of its own. Flow through it, as through every canal connection, moves toward whichever side holds less rather than toward any furnace end, so a bend can carry metal backward if the far side of it backs up.

front
right
back
left
topMade by
| Mortar | ||||
| Fire clay x 4 | any Brick x 2 | any Brick x 2 | ||
| any Brick x 2 | ||||
| Fire clay x 4 | ||||
| Molten Canal (Bend) x 2 | ||||
Needs: 6 any Brick, 1 Mortar, 8 Fire clay; makes 2 Molten Canal (Bend)
| Mortar | ||||
| Fire clay x 4 | Fireclay brick x 2 | Fireclay brick x 2 | ||
| Fireclay brick x 2 | ||||
| Fire clay x 4 | ||||
| Molten Canal (Bend) x 2 | ||||
Needs: 6 Fireclay brick, 1 Mortar, 8 Fire clay; makes 2 Molten Canal (Bend)
Amounts are the mod's defaults; the recipe-cost level changes them (see recipe cost levels).
Crafting chain
- Fire clay is dug, and six bricks and a mortar, of one colour or all fire brick, supply the masonry.
- A Molten Canal Diagram is drafted at the Drawing Table. At the Vice Bench it goes in the bench's diagram slot, with the masonry and fire clay laid in the crafting grid in the pattern of the Molten Canal (Bend). Holding right-click on the bench top with a hammer works the piece; the Craft button refuses it.
- The bend is laid where the run turns.