Shank Ladle
A hand-carried ladle for liquid metal: 600 units on a shank, filled at a tap and poured by hand.
The shank ladle is a hand vessel for a heat: 600 units of molten metal in a fire-clay lined plate bowl on a shank. Park it under a Molten Canal (Tap) to fill it, or pour a heat into it directly. Carried full, it pours by hand: hold right-click with it in hand, aimed at a small flask's runner cup or a casting bed's basin, and it pours 50 units a second after a short lead, only into a receiver that can take the metal. It re-melts what has already gone solid inside it, unlike a mold, so it can take fresh metal on top of a cast that has cooled. Set metal in it is a skull, chiselled out in bits once it is cool; the ladle is placed to be chiselled. Once it is safe to touch it can be picked back up and carried, contents and all.
A placed or parked ladle takes two cells: the bowl's cell and the shank's cell, the shank toward the player who set it down. It is refused where the shank's cell is not clear.
The ladle comes off the Vice Bench daubed and wet, and a wet ladle takes no metal: the tap, a pour and a crucible all refuse it. Dry it in a campfire. It cooks there like crushed lime does, so it needs fuel that burns hot enough: 600 C for 45 seconds, as the raw fire-clay crucible is fired. The dried ladle stays dried.

front
right
back
left
topMade by
| Iron plate | Iron rod | Nails and strips (Iron) x 2 |
| Fire clay x 3 | ||
| Shank Ladle (Plated, Wet) | ||
Needs: 1 Iron plate, 1 Iron rod, 2 Nails and strips (Iron), 3 Fire clay; makes 1 Shank Ladle (Plated, Wet)
| Cast Ladle Bowl | Iron rod | Nails and strips (Iron) x 2 |
| Fire clay x 3 | ||
| Shank Ladle (Cast, Wet) | ||
Needs: 1 Cast Ladle Bowl, 1 Iron rod, 2 Nails and strips (Iron), 3 Fire clay; makes 1 Shank Ladle (Cast, Wet)
| Iron plate | Iron rod | Rivets x 2 |
| Fire clay x 3 | ||
| Shank Ladle (Plated, Wet) | ||
Needs: 1 Iron plate, 1 Iron rod, 2 Rivets, 3 Fire clay; makes 1 Shank Ladle (Plated, Wet)
| Cast Ladle Bowl | Iron rod | Rivets x 2 |
| Fire clay x 3 | ||
| Shank Ladle (Cast, Wet) | ||
Needs: 1 Cast Ladle Bowl, 1 Iron rod, 2 Rivets, 3 Fire clay; makes 1 Shank Ladle (Cast, Wet)
Amounts are the mod's defaults; the recipe-cost level changes them (see recipe cost levels).
Crafting chain
- A Shank Ladle Diagram is drafted at the Drawing Table.
- At the Vice Bench it goes in the bench's diagram slot. The plated ladle takes an iron plate, an iron rod, two nails or rivets and three fire clay, worked in three steps: hammer the plate into the bowl, hammer the bowl onto the shank, daub the bowl with fire clay. This gives the Shank Ladle (Plated, Wet).
- The cast ladle takes a Cast Ladle Bowl (700 units, poured in a Small Flask) in place of the plate, with the same rod, fasteners and clay: drill the lugs with a hand drill, hammer the shank onto them, daub the bowl. This gives the Shank Ladle (Cast, Wet).
- The wet ladle is dried in a campfire, which gives the dried ladle.
- The ladle is parked under a Molten Canal (Tap) or filled by hand.