Cast Iron Ingot Mold
The mold takes exactly 100 units to fill, which is one pot's worth from a Crucible furnace or a matching pour from a canal, and it gives back one ingot once the cast has hardened. Pull it with an empty hand while it is still liquid and it burns; wait for it to cool, or carry it in the active hotbar slot the moment it is poured so it cannot spill.

north
east
south
west
topCrafting chain
- The Ingot Mold Diagram is drafted at the Drawing Table, and with a knife and pattern boards it makes the Ingot Mold Pattern.
- Pig iron and coke or charcoal go into the Cupola Furnace and come out as molten cast iron.
- The molten iron is poured in a Small Flask into sand shaped by the pattern, which gives the Cast Iron Ingot Mold.