Manual Fluid Pump

Hand-cranked pump. Hold right-click to draw water from an intake.

Hold right-click to crank it by hand; as long as a working Fluid Intake feeds its input side, it pushes a slow trickle of water into the output at low pressure, and it needs no engine to do it. It is the way to prime a boiler's vessel before any steam power exists at all, and to keep the vessel topped up while pressure is still building afterward.

The side the crank support shows in its model is the input face. See Steam and boilers.

Interaction

  • Hold right-click to crank the pump
Manual Fluid Pump, isometric
Manual Fluid Pump, from the northnorthManual Fluid Pump, from the easteastManual Fluid Pump, from the southsouthManual Fluid Pump, from the westwestManual Fluid Pump, the top (up)top
Manual Fluid Pump, isometric.

Made by

any Gear x 2any Hammer (tool, not consumed)
Iron plateany Plated Piping (Straight)Iron plate
any Support beam x 4Iron rod x 2any Support beam x 4
Manual Fluid Pump

Needs: 2 Iron plate, 2 any Gear, 1 any Plated Piping (Straight), 2 Iron rod, 8 any Support beam, a Hammer (kept); makes 1 Manual Fluid Pump

Amounts are the mod's defaults; the recipe-cost level changes them (see recipe cost levels).

Crafting chain

  1. Plates and rods are forged from iron ingots at the anvil, Plated Piping (Straight) is made from plates and nails and strips, and four support beams and two gears are gathered.
  2. In the crafting grid, with a hammer, they make the Manual Fluid Pump.
  3. The pump is placed with a Fluid Intake feeding its input side.