exmods

Engine Fluid Pump

Engine-driven pump. Transfers water from intake line to pressurised output line.

This is a sub-machine, seated in the drive cell under a steam engine's beam rather than placed and worked on its own. It moves water from its intake line to its output line at a rate set by the engine's delivered power, and it pressurises the output to a fraction of the engine's inlet steam pressure, which is what lets it lift water back into a boiler.

See Steam engines and sub-machines.

Engine Fluid Pump, isometric
Engine Fluid Pump, the front (south)frontEngine Fluid Pump, the right (east)rightEngine Fluid Pump, the back (north)backEngine Fluid Pump, the left (west)leftEngine Fluid Pump, the top (up)top
Engine Fluid Pump, footprint
Engine Fluid Pump, drawn from the front, which faces south.

Made by

Engine Fluid Pump, with rusty gear
any Hammer (tool, not consumed)Rusty gear
Plate (Iron or Steel)any Plated Piping (Straight)Plate (Iron or Steel)
Rod (Iron or Steel) x 2any Plated Piping (Straight)Rod (Iron or Steel) x 2
Engine Fluid Pump

Needs: 2 Plate (Iron or Steel), 1 Rusty gear, 2 any Plated Piping (Straight), a Hammer (kept), 4 Rod (Iron or Steel); makes 1 Engine Fluid Pump

Engine Fluid Pump, with gear
any Hammer (tool, not consumed)any Gear
Plate (Iron or Steel)any Plated Piping (Straight)Plate (Iron or Steel)
Rod (Iron or Steel) x 2any Plated Piping (Straight)Rod (Iron or Steel) x 2
Engine Fluid Pump

Needs: 2 Plate (Iron or Steel), 1 any Gear, 2 any Plated Piping (Straight), a Hammer (kept), 4 Rod (Iron or Steel); makes 1 Engine Fluid Pump

Amounts are the mod's defaults; the recipe-cost level changes them (see recipe cost levels).

Edit this page