Why the numbers are what they are

as of 0.8.0

Some numbers in this mod look strange beside the old books it draws on. A furnace is described in bloomeries, an ingot is a great weight of iron, and a figure from a period handbook does not appear in the game as printed. All three come from one fact: the base game has a scale of its own, and most players never see how far it sits from the real thing.

This page tells that story without the arithmetic. Each figure lives on one of three Design pages, linked below, along with the book and page it came from.

The game has its own ruler

A block edge is 1 m and is 16 voxels long. The game draws its items on that same grid, so an item's size in the world can be read straight off its shape.

Metal is counted in units, and 100 units is one vanilla ingot. Measure the vanilla ingot, rod and plate against the metal they cost and they agree closely on how many units one voxel of metal is worth. The mod takes that rate for the metal parts it adds, so the cost of a part comes from how much metal its drawing holds, whatever the metal. The rate and how it was measured are on Scale and units.

Why an ingot is so heavy

Hold an ingot in the inventory and it is a small icon. Put it on the voxel grid and it is a solid block of iron bigger than a house brick, and iron is dense. A stack of ingots is far more metal than it looks.

What that comes to in kilograms, set beside what a period smelting actually took out of the fire, is on Vanilla against reality.

Why a furnace is judged in bloomeries

The vanilla bloomery takes about as long over a heat as a period fire did. In everything else it is generous: one small block turns out a far larger bloom than a period ball, on far less charcoal. The charcoal pit that feeds it, on the other hand, makes about what a period kiln made from the same wood. No single correction fixes both.

So the mod leaves the bloomery alone and measures every later furnace against it: a new furnace is judged by how many bloomeries it replaces. The side-by-side figures are on Vanilla against reality.

Why a period book's number is not simply copied

A book gives what a real furnace made in a real week. Copied straight in, that figure would land on the wrong scale: the vanilla bloomery already outproduces the period fire it stands for (Overman, p. 383), so a period furnace at its printed rate would be compared with a bloomery that was never held to the period at all.

What survives the move between the two scales is the ratio. A book says how many times more a furnace made than a simple fire; the mod multiplies that ratio onto the vanilla bloomery. The period decides how the furnaces stand against each other, and vanilla decides how big the numbers are. Much of that scaling is still marked as proposed on the Design pages, so a furnace in play can differ from its figure there.

Not everything goes through that step. Air stays in real litres, machines are drawn at the period size of their duty, and the ingot, the rod and the bloomery keep their vanilla numbers. Which number is kept, which is scaled and how each is worked out is on How the numbers are scaled from the sources.