Roadmap

Iron Industry Expanded is still being built. This page lists every stage of the iron tier in the order a player meets it, from the first workshop to the steam hammer, and then the side lines that branch off the main line once their stage is reached.

Each machine or process carries one of three marks. Done means it is in the development build and the scripted test world that builds it passes. In progress means part of it is in the development build or it is being built now. Planned means it is drawn or designed and not built yet.

  1. The workshop

    A Drawing Table and a Vice Bench, made by hand, where every later machine is drafted and fitted.

    7 of 7 done
    • Bolts made by handDone
    • Drawing TableDone
    • DiagramsDone
    • Vice BenchDone
    • Leg vice from smithed partsDone
    • Fitter's kitDone
    • Canal pieces made at the benchDone
  2. Coke

    Now

    A coke oven bakes bituminous coal into the coke every furnace after it burns.

    2 of 3 done
    • Coke ovenDone
    • Charging by shovelIn progress
    • Top hopperDone
  3. The casting plant

    A waterwheel blows a cold blast furnace, its pig iron runs through canals, and a cupola and sand flasks turn it into castings.

    16 of 19 done
    • WaterwheelDone
    • Tub Blast MachineDone
    • BurdenDone
    • Bedding floorDone
    • Cold blast furnaceDone
    • Molten canalsDone
    • Moulds and hand pouringDone
    • Slope runnerDone
    • Floor spillsDone
    • Pig bedDone
    • Cupola furnaceDone
    • PatternsDone
    • Small flaskDone
    • Floor flaskDone
    • Pit flaskDone
    • Long flask and its copeDone
    • Sand coresPlanned
    • Cast anvilIn progress
    • Structural castingsIn progress
  4. Shaft power

    Castings worked at the vice become the main shaft, its bearings and the iron breast wheel that turns it.

    1 of 8 done
    • GreaseIn progress
    • Vice workDone
    • Cast main shaftIn progress
    • Plain bearingsIn progress
    • Iron breast wheelIn progress
    • Disengaging couplingIn progress
    • FlywheelIn progress
    • Transmissions and bevel drivesIn progress
  5. Puddling

    A puddling furnace works pig into wrought iron balls, and a belly helve on the main shingles them into bar.

    1 of 7 done
    • FireboxIn progress
    • Puddling furnaceIn progress
    • Puddling door and damperIn progress
    • Cinder tapIn progress
    • Shank ladleDone
    • Belly helveIn progress
    • Shingled barIn progress
  6. The machine shop

    Lathe, drill, shaper, planer and boring machine on the line shaft turn, cut and bore the parts the bigger machines need.

    0 of 10 done
    • Engine LatheIn progress
    • Drilling MachineIn progress
    • Shaping MachineIn progress
    • Planing MachineIn progress
    • Boring MachineIn progress
    • Line shaftPlanned
    • Turned roll setsIn progress
    • Cut gearsIn progress
    • Brass bushesPlanned
    • Forged chainIn progress
  7. Rolling and fasteners

    A heating furnace and a rolling mill make rolled stock, and the shear and fastener machines make rivets, nails and bolts.

    0 of 9 done
    • Heating furnaceIn progress
    • Rolling MillIn progress
    • Shearing MachineIn progress
    • Rivet Heading MachineIn progress
    • Nail MachineIn progress
    • Bolt cutterPlanned
    • Screwing benchPlanned
    • Storage RackIn progress
    • Heating by size at the forgePlanned
  8. Steam power

    A Cornish boiler feeds a cast steam main to a Watt beam engine, which drives the works and pumps its own feed water.

    1 of 10 done
    • Cornish BoilerIn progress
    • Cast steam main and fittingsIn progress
    • Watt Beam EngineIn progress
    • Engine CrankIn progress
    • Feed PumpIn progress
    • Manual Fluid PumpIn progress
    • Fluid IntakeIn progress
    • Stroke countersDone
    • Shaft-driven pumpsPlanned
    • Feed tankPlanned
  9. The steam hammer

    A steam hammer on its own anvil shingles slabs that are rolled to boiler plate and stamped in dies.

    0 of 8 done
    • Steam HammerIn progress
    • Shingled slabIn progress
    • Boiler plateIn progress
    • Stamping diesIn progress
    • Cornish boiler at 6 atmPlanned
    • Closed-die tool headsPlanned
    • Large heating furnacePlanned
    • Plate-Bending MachineIn progress
  10. Roasting ore

    A side line after the casting plant: a calcining kiln roasts ore, fed from bins and iron chutes.

    0 of 3 done
    • Calcining kilnPlanned
    • BinsIn progress
    • Iron chutesPlanned
  11. Holding the melt

    A side line after the casting plant: a holding ladle keeps a pour hot until the moulds are ready.

    0 of 1 done
    • Holding ladlePlanned
  12. Crucible steel

    A side line after the casting plant: sealed pots on natural draught melt blister steel into the best steel the works makes.

    0 of 2 done
    • Crucible furnaceIn progress
    • Crucible steelIn progress
  13. Brass

    A side line after crucible steel: a retort furnace distils zinc for brass made by direct fusion.

    0 of 4 done
    • Retort furnacePlanned
    • ZincPlanned
    • MercuryPlanned
    • Brass by direct fusionPlanned
  14. The horizontal engine

    A side line after steam power: a smaller engine with its own jet condenser.

    0 of 3 done
    • Simple Horizontal EngineIn progress
    • Engine modulePlanned
    • Jet CondenserIn progress
  15. Blowing engines

    A side line after steam power: steam takes over the furnace blast from the waterwheel.

    0 of 3 done
    • Blowing enginePlanned
    • Cylinder blast machinePlanned
    • McNaught refit of the WattPlanned
  16. A battery of boilers

    A side line after steam power: several boilers raise steam into one main.

    0 of 1 done
    • Boilers on one mainPlanned
  17. Ore crusher

    A side line after steam power and roasting: an engine-driven crusher fed by chutes.

    0 of 1 done
    • Ore crusherPlanned
  18. The wide hall

    A side line after the steam hammer: a wider hall for the heavy machines.

    0 of 1 done
    • Wide hallPlanned

The list is updated with each batch of work that lands, so a mark moves as soon as the work behind it does.