Cast Pipe Passthrough (Bend)
A bent cast pipe set in masonry.
The bent counterpart to the Cast Pipe Passthrough (Straight), for turning a cast run inside a wall rather than running it straight through.
A chimney stood on its open top face draws the run's gas up to the sky, the same as on the straight.
See Pipe networks and pressure.

north
east
south
west
topMade by
| any Brick x 2 | any Cast Piping (Straight) | any Brick x 2 |
| any Cast Piping (Straight) | any Hammer (tool, not consumed) | any Brick x 2 |
| any Brick x 2 | any Brick x 2 | |
| Cast Pipe Passthrough (Bend) | ||
Needs: 10 any Brick, 2 any Cast Piping (Straight), a Hammer (kept); makes 1 Cast Pipe Passthrough (Bend)
Amounts are the mod's defaults; the recipe-cost level changes them (see recipe cost levels).
Crafting chain
- Two plated straights are made as in the plated piping chain: plate, a fastener and a hammer in the crafting grid.
- The two plated straights, fired bricks and a hammer go into the crafting grid, which gives the Cast Pipe Passthrough (Bend).