Plated Piping (Bend)

The turn in plated piping, the lighter of the mod's two tiers: it bursts above 2.5 atm, which caps the whole run it sits in no matter how strong the rest of that run is built.

See Pipe networks and pressure.

Plated Piping (Bend), isometric
Plated Piping (Bend), the front (south)frontPlated Piping (Bend), the right (east)rightPlated Piping (Bend), the back (north)backPlated Piping (Bend), the left (west)leftPlated Piping (Bend), the top (up)top
Plated Piping (Bend), drawn from the front, which faces south.

Made by

Plated Piping (Bend), with nails and strips (Iron)s
Nails and strips (Iron) x 2Iron plateIron plate
Iron plate
Nails and strips (Iron) x 2
Plated Piping (Bend) x 2

Needs: 3 Iron plate, 4 Nails and strips (Iron); makes 2 Plated Piping (Bend)

Plated Piping (Bend), with rivets
Rivets x 2Iron plateIron plate
Iron plate
Rivets x 2
Plated Piping (Bend) x 2

Needs: 3 Iron plate, 4 Rivets; makes 2 Plated Piping (Bend)

Amounts are the mod's defaults; the recipe-cost level changes them (see recipe cost levels).

Crafting chain

  1. An iron ingot is smithed into a plate at the anvil.
  2. Nails and Strips come from the anvil or the Nail Machine; Rivets from the Rivet Heading Machine take their place.
  3. The Plated Pipe Diagram goes in the Vice Bench's diagram slot, and plates and fasteners in the crafting grid in the segment's pattern; a hammer held on the bench works the step, which gives the Plated Piping (Bend).