Pipe Outlet
Connects a pipe run to a machine's port face.
Left alone, the outlet simply ends a run at a machine's port face. It has a single connector, so an ordinary chimney stood on top of it draws the network's gas only when that connector faces up, as on a machine's own outlet cell. An outlet set beside a sideways port, such as a Cornish Boiler's exhaust, draws nothing through a chimney; that port takes a pipe to a passthrough with a chimney on its open top.
See Pipe networks and pressure.

north
east
south
west
topMade by
| any Brick x 2 | any Hammer (tool, not consumed) | any Brick x 2 |
| any Brick x 2 | Nails and strips (Iron) x 2 | any Brick x 2 |
| any Brick x 2 | any Plated Piping (Straight) | any Brick x 2 |
| Pipe Outlet | ||
Needs: 12 any Brick, 1 any Plated Piping (Straight), a Hammer (kept), 2 Nails and strips (Iron); makes 1 Pipe Outlet
Amounts are the mod's defaults; the recipe-cost level changes them (see recipe cost levels).
Crafting chain
- A plated straight is made as in the plated piping chain: plate, a fastener and a hammer in the crafting grid.
- The plated straight, fired bricks, nails and a hammer go into the crafting grid, which gives the Pipe Outlet.