Shearing Machine

Fit a blade set by right-clicking it into the nest, then right-click stock against the throat: one stroke crops one finished piece off and hands back the rest of the piece at the same gauge. A piece already started cannot go back through the Rolling Mill, so finish every cut on it before rolling what remains. Shearing needs no heat at all, only drive, so a cold cut is legal and simply asks more of the line than a hot one would.

See Rolling and the forming shop for what each blade set yields.

Shearing Machine, isometric
Shearing Machine, from the northnorthShearing Machine, from the easteastShearing Machine, from the southsouthShearing Machine, from the westwestShearing Machine, the top (up)top
Shearing Machine, isometric.

Made by

Heavy Cast PlateIron rod x 2Heavy Cast Plate
Heavy Cast PlateSpur GearHeavy Cast Plate
any Hammer (tool, not consumed)
Shearing Machine

Needs: 4 Heavy Cast Plate, 2 Iron rod, 1 Spur Gear, a Hammer (kept); makes 1 Shearing Machine

Amounts are the mod's defaults; the recipe-cost level changes them (see recipe cost levels).