Piping (T-Junction)

A three-way pipe junction.

It is one of the four shapes that take part in over-pressure failure, so the weakest plain pipe on a run, whether or not it is this junction, sets the burst rating for the whole thing.

A wrench cycles only the orientations valid in its cell; where the neighbours already decide it, there is nothing to cycle and it will not turn.

Piping (T-Junction), isometric — Piping (T-Junction), drawn from the front, which faces south.

Piping (T-Junction), the front (south) — Piping (T-Junction), drawn from the front, which faces south.

Made by

	any Hammer (tool, not consumed)
Nails and strips (Iron or Steel)	Plate (Iron or Steel)	Nails and strips (Iron or Steel)
	Nails and strips (Iron or Steel)
Piping (T-Junction)

Needs: 1 Plate (Iron or Steel), 3 Nails and strips (Iron or Steel), a Hammer (kept); makes 1 Piping (T-Junction)

Amounts are the mod's defaults; the recipe-cost level changes them (see Commands and config).

Edit this page