Steam Condenser

Condenses steam from its steam line back into water on its water line.

A T-shaped fitting: the stem is a steam port and the bar is a water line running straight through it. It draws up to 30 L/s of steam from the stem, condenses it at the usual 16 L of steam to 1 L of water, and adds that into the water crossing the bar, which it passes at up to 50 L/s. The fuller of the two bar faces is the inlet and the other the outlet, and the inlet's own pressure carries on downstream of it.

It is a connector, not a network node: the three runs that meet here, the steam stem and the two halves of the water bar, stay three separate networks, and the condenser bridges them itself. Leave either side unplumbed and it shows: steam with no water line vents as gas, and water with no outlet line backs up and sprays.

frontrightbacklefttop

Made by

	any Hammer (tool, not consumed)
any Piping (Straight)	Plate (Iron or Steel)	any Piping (Straight)
Nails and strips (Iron or Steel) x 2	Plate (Iron or Steel)
Steam Condenser

Needs: 2 any Piping (Straight), 2 Plate (Iron or Steel), a Hammer (kept), 2 Nails and strips (Iron or Steel); makes 1 Steam Condenser

Amounts are the mod's defaults; the recipe-cost level changes them (see Commands and config).