Pipe Passthrough (Bend)

A bent pipe set in masonry.

A 90 degree turn on the same masonry-cast pipe as Pipe Passthrough (Straight), for a run that has to change direction while staying buried in a wall or a floor, such as the water line that turns up under a boiler's block from underneath its firebox floor. It is exempt from over-pressure failure and never caps a run's rating.

Get its turn wrong and a wrench will only cycle the orientations valid in its cell; where just one fits, break it, build the neighbour that decides its shape, and place it again.

frontrightbacklefttop

Made by

any Brick x 2	any Piping (Straight)	any Brick x 2
any Piping (Straight)	any Hammer (tool, not consumed)	any Brick x 2
any Brick x 2		any Brick x 2
Pipe Passthrough (Bend)

Needs: 10 any Brick, 2 any Piping (Straight), a Hammer (kept); makes 1 Pipe Passthrough (Bend)

Amounts are the mod's defaults; the recipe-cost level changes them (see Commands and config).