Manual Fluid Pump
Hand-cranked pump. Hold right-click to draw water from an intake.
The crank stands on one face and the delivery leaves the opposite one: place it with the crank side toward you and the water comes out the far side, straight into the line you are feeding. Holding right-click cranks it by hand at 2 L/s and a fixed 1 atm of head, low enough that it flashes nothing when it feeds a boiling vessel.
It moves water, it does not make any: a Fluid Intake with a full water cube has to sit on the same network as the crank's source face, or the pump runs and delivers nothing.
Interaction
- Hold right-click to crank the pump

front
right
back
left
topMade by
| Rusty gear x 2 | any Hammer (tool, not consumed) | |
| Plate (Iron or Steel) | any Piping (Straight) | Plate (Iron or Steel) |
| any Support beam x 4 | Rod (Iron or Steel) x 2 | any Support beam x 4 |
| Manual Fluid Pump | ||
Needs: 2 Plate (Iron or Steel), 2 Rusty gear, 1 any Piping (Straight), 2 Rod (Iron or Steel), 8 any Support beam, a Hammer (kept); makes 1 Manual Fluid Pump
| any Gear x 2 | any Hammer (tool, not consumed) | |
| Plate (Iron or Steel) | any Piping (Straight) | Plate (Iron or Steel) |
| any Support beam x 4 | Rod (Iron or Steel) x 2 | any Support beam x 4 |
| Manual Fluid Pump | ||
Needs: 2 Plate (Iron or Steel), 2 any Gear, 1 any Piping (Straight), 2 Rod (Iron or Steel), 8 any Support beam, a Hammer (kept); makes 1 Manual Fluid Pump
Amounts are the mod's defaults; the recipe-cost level changes them (see Commands and config).