Tall Hopper

Two blocks tall; charges the furnace shaft below it. It holds one material at a time, which is how a round is laid: a load of fuel, then a load of burden.

It has no on/off toggle, so a loaded hopper drips until it is empty regardless of what else is happening below it.

Placed over anything but a furnace shaft it accepts nothing, since there is no column beneath it to charge. See Ore handling and burden.

frontrightbacklefttop

Made by

Tall Hopper, with nails and strips

	any Hammer (tool, not consumed)
Plate (Iron or Steel)	Nails and strips (Iron or Steel)	Plate (Iron or Steel)
Nails and strips (Iron or Steel)	Plate (Iron or Steel)	Nails and strips (Iron or Steel)
Tall Hopper

Needs: 3 Plate (Iron or Steel), 3 Nails and strips (Iron or Steel), a Hammer (kept); makes 1 Tall Hopper

Tall Hopper, with rivets

	any Hammer (tool, not consumed)
Plate (Iron or Steel)	Rivets	Plate (Iron or Steel)
Rivets	Plate (Iron or Steel)	Rivets
Tall Hopper

Needs: 3 Plate (Iron or Steel), 3 Rivets, a Hammer (kept); makes 1 Tall Hopper

Amounts are the mod's defaults; the recipe-cost level changes them (see recipe cost levels).