Chimney Damper

The damper at the top of the stack, on a control rod that runs down to the damper pull in the front wall. A reverberatory furnace has no blower, so this is its only air control.

Right-click to throw the damper; shutting it trims the draught to a gentle preheat the way an open door spills it away entirely.

The chimney cap, shown opening, isoThe chimney cap, shown opening, open cycle
The chimney cap, shown opening

See Furnaces and heat for what a shut damper costs a lit hearth.

Chimney Damper, isometric
Chimney Damper, from the northnorthChimney Damper, from the easteastChimney Damper, from the southsouthChimney Damper, from the westwestChimney Damper, the top (up)top
Chimney Damper, isometric.

Made by

Iron rod
Refractory brick (Tier 3) x 2Iron plateRefractory brick (Tier 3) x 2
any Hammer (tool, not consumed)
Chimney Damper

Needs: 4 Refractory brick (Tier 3), 1 Iron rod, 1 Iron plate, a Hammer (kept); makes 1 Chimney Damper

Amounts are the mod's defaults; the recipe-cost level changes them (see recipe cost levels).