Nail Plate
Any blade set in the Shearing Machine turns one vanilla iron plate into 2 Nail Plate, and a rolled rod taken flat to gauge 1.0 is claimed off the mill as Nail Plate directly, with no crop - the one whole-piece conversion the rolling line makes, which is why both routes land on the same 100 units. The nail machine, fitted with a Nail Die, turns one Nail Plate into 4 bundles of vanilla nails and strips in 2 seconds at 0.2 N.m of drive. It is the cheaper of the two fastener routes - see Rivet Rod for the pricier, pressure-tight one.

Crafting chain
- Iron ingots are forged into a plate at the anvil.
- The Shearing Machine cuts the plate into 2 Nail Plates.
Once the Rolling Mill stands, an iron rod taken flat to a gauge of 1.0 with a flat roll set is claimed off the mill as a Nail Plate as well.