Cast Iron Bevel Drive
A bevel is made in place rather than crafted whole: hold a Cast Iron Bevel Gear against a length of shaft and it consumes the gear and swaps that cell for a corner. It connects on every face, following whatever perpendicular shaft is placed against it, with no facing to choose and nothing to support it first.
See Shaft power and the flywheel.

north
east
south
west
topCrafting chain
- Molten cast iron from the Cupola Furnace is poured in a Small Flask with the pattern for a bevel gear blank.
- At the Vice Bench the blank takes two rounds of chisel and hammer, the file, then the calipers, which gives the Cast Iron Bevel Gear.
- The gear is held against a placed Cast Iron Shaft and swaps that cell for the bevel.