Bessemer Control

Starts the Bessemer converter.

The control is where every order to the converter is given. Right-clicking it with one large gear and eight iron or steel rods in the hotbar spawns the vessel two blocks in front, which is what completes the structure; sneak and right-click tilts the vessel to filling, right-click with no modifier stands it upright and starts the blow, sprint and right-click tilts it the other way to pour, and right-clicking with steel bits charges them in as cold scrap. The transmission under it and the gas intake beyond the vessel have to carry its facing, or the machine completes and then refuses to run. Its own readout says only whether the axle is turning: the charge, the carbon and the status are all on the vessel.

Interaction

Right-click to place converter vessel
Right-click to upright: blow / refine
Right-click to tilt to fill from the input tap
Right-click to tilt to pour: skim slag, then steel (hold)
Right-click to charge cold steel scrap
Right-click to show multiblock structure

Bessemer Control, isometric — Bessemer Control, drawn from the front, which faces south.

Bessemer Control, the front (south) — Bessemer Control, drawn from the front, which faces south.

Made by

any Hammer (tool, not consumed)		Rod (Iron or Steel) x 12
Nails and strips (Iron or Steel) x 8	Plate (Iron or Steel) x 4	Plate (Iron or Steel) x 4
Plate (Iron or Steel) x 4	Plate (Iron or Steel) x 4	Rod (Iron or Steel) x 12
Bessemer Control

Needs: 24 Rod (Iron or Steel), 16 Plate (Iron or Steel), a Hammer (kept), 8 Nails and strips (Iron or Steel); makes 1 Bessemer Control

Amounts are the mod's defaults; the recipe-cost level changes them (see recipe cost levels).

Edit this page