Cowper Stove Intake

Starts the Cowper stove.

The intake is the face the furnace's exhaust arrives at, and its facing is the whole stove's: the shell, the heat sinks and the other three pipe connections are laid out behind it. The cell directly under it is left clear for a burning coal pile, which charges the stove about five times faster on anthracite and about four times on any other coal. Its brick tier changes how the block looks and nothing else, and refractory brick of any tier completes the structure.

Interaction

• Right-click to show multiblock structure

frontrightbacklefttop

Made by

any Refractory brick x 2	any Hammer (tool, not consumed)	any Refractory brick x 2
any Refractory brick x 2	any Cast Piping (Straight)	any Refractory brick x 2
any Refractory brick x 2	Nails and strips (Iron or Steel) x 2	any Refractory brick x 2
Cowper Stove Intake

Needs: 12 any Refractory brick, 2 Nails and strips (Iron or Steel), 1 any Cast Piping (Straight), a Hammer (kept); makes 1 Cowper Stove Intake

Amounts are the mod's defaults; the recipe-cost level changes them (see recipe cost levels).