Cast Shaft Blank
A straight cast-iron bar, bored and turned into shafting at the boring machine.
Cast Shaft Blank comes off a Floor Flask pour (three) or a Long Flask pour (nine) with the shaft pattern, 1260 units each, a straight cast-iron bar turned true into shafting at the lathe. It substitutes for no other cast part - a recipe that wants a shaft blank names this item, not a finished shaft.

Crafting chain
- Pig iron and coke or charcoal go into the Cupola Furnace and come out as molten cast iron.
- The molten iron is poured in a Floor Flask or a Long Flask with the shaft pattern, which gives the Cast Shaft Blank.
- The blank is seated in the face vice of the Vice Bench and worked in four steps, which gives the cast main shaft.
The shaft block is no longer made from rod, plate and a hammer.