Molten Metal Puddle

A Molten Metal Puddle is liquid metal that got out of its holder and landed on an iron floor. It is never placed by hand. It forms when a holder still carrying liquid metal is broken (a small, floor or long flask, a casting bed, a canal piece), or when a tool mold full of liquid metal leaves the active hand: moved to another slot, carried in the inventory, or knocked off a mold rack. The metal lands in the cell at the spill point only when an iron floor lies under it: a Chequer-Plate Floor, a crucible plate or a teeming box. Anywhere else it is lost.

One puddle cell holds 100 units. A spill fills the first cell and spreads what is left over the neighbouring floor cells, at most 16 cells in all; a cell that is not air, or that holds a different metal, takes none, and what finds no room is lost.

A puddle cell joined to puddles on all four sides, iso
A puddle cell joined to puddles on all four sides
Molten Metal Puddle, isometric
Molten Metal Puddle, from the northnorthMolten Metal Puddle, from the easteastMolten Metal Puddle, from the southsouthMolten Metal Puddle, from the westwestMolten Metal Puddle, the top (up)top
Molten Metal Puddle, isometric.

Hot metal underfoot

While its metal is at 200 C or more, a puddle burns anyone standing in its cell, one point of fire damage each second. It cools on its own, as calendar time passes. Breaking a puddle that is still liquid spills it again onto the floor around it.

Getting the metal back

Once the puddle has hardened, hold a chisel in the active hand and a hammer in the off-hand and right-click it. The puddle is chipped out and gives back 75% of its metal as metal bits; a puddle too small to give 5 units gives nothing. A puddle that is solid but still too hot refuses the chisel. Breaking a hardened puddle gives the same bits.

See Molten metal and casting.