Bessemer Transmission

Uses axle's mechanical power to rotate the vessesl.

The Bessemer Transmission sits directly under the Bessemer Control and is where an axle drives the whole converter: the vessel loads the shaft by 0.25 once it is turning above 0.1 geared speed. It has to face the same way as the control block, or the structure completes and then refuses to run with "Transmission misaligned!" on the panel. See Bessemer process for what the vessel does with that power once it has it.

frontrightbacklefttop

Made by

Bessemer Transmission, with rusty gears

any Hammer (tool, not consumed)	Plate (Iron or Steel) x 4	Rod (Iron or Steel) x 12
Wooden axle	Rusty gear x 16	Plate (Iron or Steel) x 4
Nails and strips (Iron or Steel) x 8	Plate (Iron or Steel) x 4	Rod (Iron or Steel) x 12
Bessemer Transmission

Needs: 24 Rod (Iron or Steel), 12 Plate (Iron or Steel), a Hammer (kept), 8 Nails and strips (Iron or Steel), 16 Rusty gear, 1 Wooden axle; makes 1 Bessemer Transmission

Bessemer Transmission, with gears

any Hammer (tool, not consumed)	Plate (Iron or Steel) x 4	Rod (Iron or Steel) x 12
Wooden axle	any Gear x 16	Plate (Iron or Steel) x 4
Nails and strips (Iron or Steel) x 8	Plate (Iron or Steel) x 4	Rod (Iron or Steel) x 12
Bessemer Transmission

Needs: 24 Rod (Iron or Steel), 12 Plate (Iron or Steel), a Hammer (kept), 8 Nails and strips (Iron or Steel), 16 any Gear, 1 Wooden axle; makes 1 Bessemer Transmission

Amounts are the mod's defaults; the recipe-cost level changes them (see Commands and config).