Bessemer Control

Starts the Bessemer converter.

The control is the head of the converter and the block every other part of it is measured from: filling, normal and pouring are set on it, and its panel names whatever is missing before it names the charge. Place it facing the way the machine should run, because the transmission below it and the gas intake four cells out have to match. Once the rest is standing, right-click it with one large gear and eight rods in the hotbar to raise the vessel.

Interaction

Right-click to place converter vessel
Right-click to set to normal
Right-click to set to filling
Right-click to set to pouring (hold 1s)

Bessemer Control, isometric — Bessemer Control, drawn from the front, which faces south.

Bessemer Control, the front (south) — Bessemer Control, drawn from the front, which faces south.

Made by

any Hammer (tool, not consumed)		Rod (Iron or Steel) x 12
Nails and strips (Iron or Steel) x 8	Plate (Iron or Steel) x 4	Plate (Iron or Steel) x 4
Plate (Iron or Steel) x 4	Plate (Iron or Steel) x 4	Rod (Iron or Steel) x 12
Bessemer Control

Needs: 24 Rod (Iron or Steel), 16 Plate (Iron or Steel), a Hammer (kept), 8 Nails and strips (Iron or Steel); makes 1 Bessemer Control

Amounts are the mod's defaults; the recipe-cost level changes them (see Commands and config).

Edit this page