Molten Metal Tap
Drains the furnace's molten reservoir into a canal below.
The furnace carries two of these, one draining the lower, iron reservoir and one the upper, slag reservoir, each at 40 units per second. A tap only opens over a Molten Canal (Start), brick (or the cobblestone kind) placed one block below its spout; toggle it with an empty hand, and it refuses with nothing under it to drain into. Each tap has to face the way the furnace's layout sets for its wall; turned any other way it leaves the furnace incomplete, and the build outline marks it red. A wrench turns it a quarter turn in place, left click one way and right click the other, and an open tap stays open. See Ironmaking for the reservoir sizes and Molten metal for laying out the run it feeds.
Interaction
- Right-click to toggle tap pouring

front
right
back
left
topMade by
| any Refractory brick x 2 | Plate (Iron or Steel) | any Hammer (tool, not consumed) |
| any Refractory brick x 2 | Fire clay x 12 | any Chisel (tool, not consumed) |
| any Refractory brick x 2 | any Refractory brick x 2 | any Refractory brick x 2 |
| Molten Metal Tap | ||
Needs: 10 any Refractory brick, 12 Fire clay, 1 Plate (Iron or Steel), a Hammer (kept), a Chisel (kept); makes 1 Molten Metal Tap
Amounts are the mod's defaults; the recipe-cost level changes them (see Commands and config).