Vice Bench
The bench where anything made from a diagram is put together. Placed as a frame: right-click it with 5 planks and a bolt in the hotbar for the top. A leg vice can be fitted to its front for vice work.
The Vice Bench is where anything made from a Diagram is put together. It has a 5 by 5 grid, a slot for the diagram and a slot for finished work. Some crafts are made with its Craft button and others are worked on the bench with a tool in hand. See Diagrams and the drawing table.

Interaction
- Right-click to open vice bench

front
right
back
left
topMade by
| any Board | Nails and strips (Iron) | any Board |
| any Board | any Board | |
| Vice Bench | ||
Needs: 4 any Board, 1 Nails and strips (Iron); makes 1 Vice Bench
Amounts are the mod's defaults; the recipe-cost level changes them (see recipe cost levels).
Built in place
| Stage | Materials |
|---|---|
| 1 | none |
| 2 | any Board x 5, Bolts and Nuts |
| 3 | Leg Vice |
Needs: 5 any Board, 1 Bolts and Nuts, 1 Leg Vice
Amounts are the mod's defaults; the recipe-cost level changes them (see recipe cost levels).
Building it
The bench is built up on a placed frame. It stands two cells long.
- Planks come from logs. Iron nails and strips are smithed. A bolt is threaded in the hand grid from smithed Bolt Blanks with the Screw Plate, which gives Bolts and Nuts.
- 4 planks and 1 iron nails and strips go into the hand crafting grid, which gives the Vice Bench frame.
- Place the frame. Its far cell along the bench must be clear.
- With 5 planks and a bolt in your hotbar, right-click the frame. That pays the top, and the bench is ready to use.
Until the top is on, a right-click pays it and the window does not open.
The leg vice
The face vice is an optional fitting: the bench does all its other work without one, and only vice work needs it. A Leg Vice is assembled in the hand grid from its smithed parts: both vice legs, two jaws, the screw, the spring, an iron rod, an iron nails and strips and a bolt.
Right-click the finished bench with the Leg Vice in hand, at any time, to fit it to the front. It claims three more cells: the one above the bench, the one in front of the vice, and the one above that. Those must be clear when you fit it.
Right-click the vice's screw and bar to open and close it. A blank that vice work takes is seated by right-clicking the vice with it in hand, and the jaws shut on it. An empty hand takes back what the vice holds.
Using the bench
Right-click the bench to open its window. Put a diagram in the slot, choose what to make from its list, and lay the items on the shadows in the grid. See Diagrams and the drawing table for how diagrams work.
A craft with no steps is made with the Craft button. A craft with steps is worked on the bench: shut the window, hold right-click on the bench top with the tool the step names, and keep holding until the step is done. The line above the hotbar then names the next step with its tool and its hits, and says what was made when the last step is done. A click while sneaking opens the window over a laid craft.
What goes wrong
The window will not open. The top is not paid. Your click paid it or did nothing. Look at the frame to see what it needs.
"Missing 1x Bolts and Nuts" when you click the frame. Your hotbar is short of what the stage needs, and the number is how many more. The stage takes the whole bill at once or nothing.
The Leg Vice will not fit. A block stands in one of the three cells the vice claims. The game shows an error above the hotbar and keeps the vice in your hand. Clear the cell above the bench, the one in front of the vice and the one above that, and right-click again.
The Craft button is greyed out and says "Worked on the bench: hold right-click on it with the tool shown." This craft has steps. Shut the window and hold right-click on the bench with the tool the step names.
"This step needs: a hammer." You held the wrong thing for this step. The step does not move and nothing is spent, and the window opens instead. Take the tool it names. Some steps also name a second tool for the left hand.
"The finished work is still on the bench. Take it from the output slot first." A worked piece is waiting in the output slot. Take it out and carry on.
Craft made one and then does nothing. Your inventory is full, so the piece went to the output slot, and the slot is full too. Nothing more is taken from the grid. Make room and take the piece out.
"The bricks must all be one kind." The grid mixes kinds of one ingredient. It says the same for planks, stones and metal parts. Lay one kind only.
The grid makes nothing. The diagram slot is empty or holds the wrong diagram, or the items are not on the shadows. The bill stays in the grid whole. With the slot empty it says "Put a diagram here to see what it makes."
You let go halfway through a step. Nothing is lost and no message appears. The hits already counted stay, the swing in progress does not count, and the same step carries on when you hold again. Taking the bill out of the grid starts the work over from the first step, with nothing spent.
The bench is broken. Everything in its slots falls out. You get the frame back, and of what you paid for the top and the vice, four fifths on average, counted per stack by chance, so a single Leg Vice can be lost. A bare frame gives back only itself. The share is a server setting.