Blowing Engine
Steam-engine sub-machine that pressurises air.
A Blowing Engine stands in the Cornish Engine's sub-machine cell, two blocks along the engine's axis under the beam, and is the source of blast pressure for the whole hot-blast plant: it injects 144 litres of air a second per unit of the engine's power, at the engine's inlet steam pressure times 0.75, into the pipe run on its side. Blast counts at 2.5 atm, so the engine's steam has to stay above 3.4 atm or the blower falls under the gate mid-blow.
A tub blast machine cannot reach that pressure at all; this block, on a Cornish Engine, is the only way the mod gets there.

front
right
back
left
topMade by
| any Hammer (tool, not consumed) | ||
| Plate (Iron or Steel) | Rusty gear x 2 | Plate (Iron or Steel) |
| Rod (Iron or Steel) x 2 | Plate (Iron or Steel) | Rod (Iron or Steel) x 2 |
| Blowing Engine | ||
Needs: 3 Plate (Iron or Steel), 4 Rod (Iron or Steel), 2 Rusty gear, a Hammer (kept); makes 1 Blowing Engine
| any Hammer (tool, not consumed) | ||
| Plate (Iron or Steel) | any Gear x 2 | Plate (Iron or Steel) |
| Rod (Iron or Steel) x 2 | Plate (Iron or Steel) | Rod (Iron or Steel) x 2 |
| Blowing Engine | ||
Needs: 3 Plate (Iron or Steel), 4 Rod (Iron or Steel), 2 any Gear, a Hammer (kept); makes 1 Blowing Engine
Amounts are the mod's defaults; the recipe-cost level changes them (see recipe cost levels).
Planned layout
The figure shows the cells the machine will claim, layer by layer, with its collision boxes in red.

| Glyph | Meaning |
|---|---|
s | sunk full cube |
_ | cell with boxes |
h | marked cell |
O | principal |
# | full cube |
V | control svvalve |