Cowper Stove Intake

Starts the Cowper stove.

The intake is the stove's front face: the furnace's exhaust main arrives here, and the panel on it reads the status and what the stove is drawing. Place it facing the way that pipe will come in, because it fixes the stove's direction. The cell directly below it is left empty for the coal pile that speeds charging.

frontrightbacklefttop

Made by

any Refractory brick x 2	any Hammer (tool, not consumed)	any Refractory brick x 2
any Refractory brick x 2	any Piping (Straight)	any Refractory brick x 2
any Refractory brick x 2	Nails and strips (Iron or Steel) x 2	any Refractory brick x 2
Cowper Stove Intake

Needs: 12 any Refractory brick, 2 Nails and strips (Iron or Steel), 1 any Piping (Straight), a Hammer (kept); makes 1 Cowper Stove Intake

Amounts are the mod's defaults; the recipe-cost level changes them (see Commands and config).